强激光与粒子束, 2016, 28 (4): 045103, 网络出版: 2016-04-01   

低β 162.5 MHz taper型HWR腔的机械性能分析

Mechanical analysis of low β 162.5 MHz taper HWR cavity
作者单位
1 北京大学 重离子物理研究所, 北京 100871
2 中国工程物理研究院 流体物理研究所, 四川 绵阳 621900
摘要
北京大学正在设计β=0.09, 频率为162.5 MHz taper型的二分之一波长射频超导谐振腔(HWR腔),这种腔针对高流强质子束(约100 mA)和氘束(约50 mA)的加速而设计。对于这种超导腔而言机械性能分析是十分重要的,可以通过机械性能分析来估计由于腔体的形变带来的频率偏移。用ANSYS分析了由于液氦压力不稳定造成的麦克风效应以及洛伦兹力造成的腔体失谐,并且对沿腔体轴线方向的调谐进行了分析。模拟结果显示这只腔压力敏感系数为31.1 Hz/kPa,洛伦兹力系数为-0.41 Hz/(MV·m-1)2。 腔体的调谐范围达到±177 kHz,足够补偿腔体可能的频率偏移。腔体的机械性能满足腔体正常运行的要求。
Abstract
Peking University is designing a superconducting taper-type half-wave resonator (HWR) with frequency of 162.5 MHz and β of 0.09 for high current proton beam (about 100 mA) and deuteron beam (about 50 mA) acceleration. For this kind of SRF cavity, mechanical analysis is important to predict the frequency shift caused by the cavity deformation. ANSYS codes are used to analyse the frequency shift caused by helium bath pressure and Lorentz force, and the tuning range. Simulation results show that this HWR cavity has pressure sensitivity as low as 31.1 Hz/kPa and Lorentz force detuning coefficient of -0.41 Hz/(MV·m-1)2. The tuning range of the cavity is ±177 kHz which is wide enough for compensating the possible frequency shift. The mechanical property of the cavity permits the cavity’s stable operation.

范培亮, 朱凤, 钟胡天翔, 全胜文, 刘克新. 低β 162.5 MHz taper型HWR腔的机械性能分析[J]. 强激光与粒子束, 2016, 28(4): 045103. Fan Peiliang, Zhu Feng, Zhong Hutianxiang, Quan Shengwen, Liu Kexin. Mechanical analysis of low β 162.5 MHz taper HWR cavity[J]. High Power Laser and Particle Beams, 2016, 28(4): 045103.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!