光学学报, 2016, 36 (5): 0515004, 网络出版: 2016-05-03   

基于点阵标定板的视觉测量系统的标定方法 下载: 676次

Calibration Method Based on Lattice Calibration Plate in Vision Measurement System
作者单位
沈阳工业大学机械工程学院, 辽宁 沈阳 110870
摘要
在应用机器视觉技术进行测量时,测量系统的像素当量、系统误差和光源强度等因素均会对测量精度造成影响,因此必须对像素当量和系统误差进行标定,并分析光源强度对工件图像边缘位置的影响。提出一种基于点阵标定板的视觉测量系统综合标定方法,在提取标定圆圆心坐标的基础上,计算圆心距物理尺寸和像素尺寸的比值,得到像素当量;建立圆心实际坐标和理论坐标的二元三次误差模型,并利用最小二乘法拟合求解误差模型系数;通过确定光源强度引起的图像边缘位置误差补偿量,实现测量系统的综合标定。实验结果表明,该方法可以有效提高系统的测量精度。
Abstract
In the application of machine vision technology for measurement, the factors of pixel equivalent, system errors and light source intensity in measurement system affect measuring accuracy. In order to improve the measuring accuracy, the pixel equivalent and system errors must be calibrated, and we need to analyze light source intensity which influences edge location of work piece image. An integrated calibration method based on lattice calibration plate in vision measurement system is put forward. On the basis of extracting center coordinates of calibration circle, pixel equivalent is got by calculating the center distance of physical value and pixel value. The error model with the actual coordinates and theoretical coordinates of center point is established, the error model coefficients are got by the least squares fitting. By determining the compensation amount of image edge position error caused by light source intensity, composite calibration of measurement system is achieved. The experimental results show that this method can effectively improve the measurement precision.

段振云, 王宁, 赵文辉, 赵文珍. 基于点阵标定板的视觉测量系统的标定方法[J]. 光学学报, 2016, 36(5): 0515004. Duan Zhenyun, Wang Ning, Zhao Wenhui, Zhao Wenzhen. Calibration Method Based on Lattice Calibration Plate in Vision Measurement System[J]. Acta Optica Sinica, 2016, 36(5): 0515004.

本文已被 9 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!