半导体光电, 2016, 37 (2): 190, 网络出版: 2016-05-11   

无抖动机械式光开关结构设计

Structure Design of Mechanical-optical Switch with No Jitter
作者单位
武汉光迅科技股份有限公司,武汉 430205
摘要
针对机械式光开关的抖动问题,利用一般等截面悬臂梁模型和端部有附加质量的悬臂梁模型,采用模态叠加法求解悬臂梁在冲击力作用下的动态响应,得出了机械式光开关抖动的原因和降低光开关抖动的结构设计方法。利用该方法对一种有抖动的移动棱镜式机械光开关的结构进行改进,实验结果表明,改进后的光开关基本无抖动。
Abstract
In view of the jitter of mechanical-optical switch, based on the models of a common uniform cantilever beam and a uniform cantilever beam carrying a mass at the free end, the dynamic response of beam under impact is researched by mode superposition method. The research indicates the reasons causing the jitter of optical power. A method of structure optimization is proposed to avoid the jitter. Experimental results prove the effectiveness of this method.

李长安, 江毅, 全本庆, 肖清明. 无抖动机械式光开关结构设计[J]. 半导体光电, 2016, 37(2): 190. Li Chang’an, Jiang Yi, Quan Benqing, Xiao Qingming. Structure Design of Mechanical-optical Switch with No Jitter[J]. Semiconductor Optoelectronics, 2016, 37(2): 190.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!