中国激光, 2016, 43 (7): 0701004, 网络出版: 2016-07-13   

高功率光纤激光器包层光滤除器的温度场研究

Temperature Distribution of Cladding Light Strippers in High Power All-Fiber Lasers
作者单位
1 上海大学机电工程与自动化学院, 上海 200072
2 中国科学院上海光学精密机械研究所上海市全固态激光器与应用技术重点实验室, 上海 201800
3 南京中科神光科技有限公司, 江苏 南京 210038
摘要
双包层光纤激光器输出光中的包层光严重影响了激光的光束质量、光谱特性以及激光器的可靠性和稳定性,有效滤除包层光是双包层光纤激光器工程化的一个重要环节。对高功率包层光滤除器的热效应进行了理论与实验研究,利用ANSYS中流体动力学模块仿真分析了高功率包层光滤除器的温度场分布,在15~600 W的包层光滤除功率下进行了实验验证,在此基础上仿真优化了千瓦量级功率的包层光滤除器。优化后滤除器温度下降近46 ℃,可稳定工作在80 ℃左右。
Abstract
Unwanted cladding light in output of double-cladding fiber lasers has major adverse effect on the beam quality, spectral characteristics, and reliability and stability of lasers. It is of vital importance to strip the cladding light for engineering of the double-cladding fiber lasers. The thermal effect of high power cladding light strippers is studied theoretically and experimentally. The temperature distribution is simulated by means of computational fluid dynamics based on ANSYS. The experiments validate that the temperature simulation is effective and applicable for stripping power ranging from 15 W to 600 W. Furthermore, a kW-level cladding light stripper is optimized based on the thermal simulation. After optimization, the temperature of the stripper declines by up to 46 ℃, and the stripper can run stably at about 80 ℃.

胡志涛, 陈晓龙, 何兵, 周军, 张建华. 高功率光纤激光器包层光滤除器的温度场研究[J]. 中国激光, 2016, 43(7): 0701004. Hu Zhitao, Chen Xiaolong, He Bing, Zhou Jun, Zhang Jianhua. Temperature Distribution of Cladding Light Strippers in High Power All-Fiber Lasers[J]. Chinese Journal of Lasers, 2016, 43(7): 0701004.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!