红外与激光工程, 2016, 45 (6): 0606003, 网络出版: 2016-07-26   

500 W光纤耦合半导体激光模块

500 W fiber-coupled semiconductor laser module
作者单位
北京工业大学 激光工程研究院, 北京 100124
摘要
针对半导体激光器在工业领域的应用和光纤耦合可以实现柔性传输的特点, 设计了光纤耦合半导体激光模块。采用光束整形技术、空间合束、偏振合束和光纤耦合等技术, 将两组共10个整形后的半导体标准阵列进行合束, 扩束后耦合入芯径400 μm、数值孔径0.22的镀增透膜光纤。在工作电流70 A时, 光纤耦合前功率为545 W, 光纤耦合后功率为518 W, 光纤耦合效率高于95%, 得到很高的光纤耦合效率, 电光转换效率为43%, 为下一步千瓦级光纤耦合半导体激光器的制备奠定了基础。
Abstract
The semiconductor laser is widely used in industrial fields, and fiber coupling enables flexible transmission. Accordingly, a 500 W high-efficiency fiber-coupled module was designed. The technologies of beam shaping, spatial multiplexing, polarization multiplexing and fiber coupling were used to couple ten bars into a laser beam. Ten bars were collimated by fast axis collimation lens. Then the beams were transformed, and collimated by slow axis collimation optics. And then the beam were combined. All the beam were focused into a multimode fiber(400 μm core diameter, NA=0.22) after expanding. Experimental results show that the laser output from the module can reach to 545 W in the current of 70 A, corresponding the laser output from fiber could reach to 518 W. High coupling efficiency as 95% was obtained, electro-optic conversion efficiency is 43%, which makes a foundation for kilowatt fiber-coupling semiconductor laser.

徐丹, 黄雪松, 姜梦华, 惠勇凌, 雷訇, 李强. 500 W光纤耦合半导体激光模块[J]. 红外与激光工程, 2016, 45(6): 0606003. Xu Dan, Huang Xuesong, Jiang Menghua, Hui Yongling, Lei Hong, Li Qiang. 500 W fiber-coupled semiconductor laser module[J]. Infrared and Laser Engineering, 2016, 45(6): 0606003.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!