红外与激光工程, 2016, 45 (6): 0617001, 网络出版: 2016-07-26   

基于数字天顶仪的视场角分析

Analysis of field of view angle based on digital zenith camera
作者单位
军工程大学 兵器发射理论与技术国家重点学科实验室, 陕西 西安 710025
摘要
运用数字天顶仪进行定位是一种高精度的天文测量方法。在定位的过程中需要设定概略位置和进行局部星图识别。局部星图识别是在以概略位置为中心的一定范围内进行的。在进行局部星图识别时一般用数字天顶仪的视场角来确定局部星图识别的范围, 实际上这是不准确的。通过对数字天顶仪视场角的分析推导了局部星图识别时的经纬度范围, 并通过局部星图识别的范围对概略位置进行了研究。实验数据的分析结果表明, 在进行局部星图识别时选取的经纬度范围是要大于视场角的, 且随着概略位置的设定值逐渐接近测站点真实值, 识别的恒星数量也在逐渐增加。
Abstract
Digital zenith camera has high precision in astrogeodesy. Identifying the star partially and setting the approximate position are needed when using digital zenith camera to orient. The scope is around the approximate position during star identification partially. Generally, the scope is usually replaced by field of view angle of digital zenith camera. Actually, this is not correct. The scope of star identification partially was deduced based on the analysis of the field of view angle of digital zenith camera. Then, the approximate position was analyzed according to the scope. The experimental data demonstrates that the range of longitude and latitude of identified stars should be above the field of view angle of digital zenith camera. Also, the recognized star number will rise when the approximate position is close to the true position.

刘先一, 周召发, 张志利, 刘殿剑, 朱文勇. 基于数字天顶仪的视场角分析[J]. 红外与激光工程, 2016, 45(6): 0617001. Liu Xianyi, Zhou Zhaofa, Zhang Zhili, Liu Dianjian, Zhu Wenyong. Analysis of field of view angle based on digital zenith camera[J]. Infrared and Laser Engineering, 2016, 45(6): 0617001.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!