强激光与粒子束, 2016, 28 (8): 28081004, 网络出版: 2016-07-26  

熔石英表面杂质元素在酸蚀过程中的变化

Change of surface impurity elements in the process of acid etching on fused silica
作者单位
1 西南科技大学 材料科学与工程学院, 四川 绵阳 621010
2 中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621900
摘要
为了探寻熔石英表面痕量杂质元素种类以及随HF酸蚀刻过程中的变化情况,用质量分数为1%HF酸溶液对熔石英进行长达24,48,72,96 h的静态蚀刻实验。结合飞行时间二次离子质谱(TOF-SIMS)和X射线光电子能谱(XPS)测试分析结果发现,熔石英试片表面的痕量杂质元素主要含有B,F,K,Ca,Na,Al,Zn和Cr元素,其中绝大部分都存在于贝氏层中,在亚表面缺陷层检测到有K,Ca元素。所含有的K,Na杂质元素会与氟硅酸反应生成氟硅酸盐化合物。分析表明,在HF酸蚀刻的过程中一部分杂质元素将被消除,一部分杂质元素和生成氟硅酸盐化合物会随着蚀刻液逐渐从熔石英表面向表面纵深方向扩散并被试片吸附沉积,且随着深度的加深各元素的相对含量逐渐减少。
Abstract
In order to explore the elements of trace impurities in fused silica and the change of them during HF acid etching process, the static etching experiments of 24 h, 48 h, 72 h, 96 h were performed by the mass fraction of 1% HF acid solution. The results of TOF-SIMS and XPS show that, the fused silica surface mainly contains eight trace impurity elements, including B, F, K, Ca, Na, Al, Zn, Ca, and Cr; most of these elements are in the Beiby layer, and K and Ca impurity elements are detected in the subsurface defect layer; fluosilicate salts of K, Na are generated. By analysis, during the process of HF acid etching, a part of the impurity elements will be removed, and a portion of the impurity elements and the fluosilicate salts will diffuse gradually from the surface of the fused silica to the depth with the etching liquid while some will be absorbed by fused silica surface and deposit, and the contents of them reduce gradually with the increase of the depth.

殷玉春, 李玉香, 严鸿维, 袁晓东, 白阳, 郑万国. 熔石英表面杂质元素在酸蚀过程中的变化[J]. 强激光与粒子束, 2016, 28(8): 28081004. Yin Yuchun, Li Yuxiang, Yan Hongwei, Yuan Xiaodong, Bai Yang, Zheng Wanguo. Change of surface impurity elements in the process of acid etching on fused silica[J]. High Power Laser and Particle Beams, 2016, 28(8): 28081004.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!