光学 精密工程, 2016, 24 (7): 1564, 网络出版: 2016-08-29   

采样点分布对基于面形斜率径向基模型的自由曲面拟合精度的影响

Influence of sampling point distribution in freeform surfaces fitting with radial based function model
作者单位
1 南开大学 现代光学研究所 光学信息技术科学教育部重点实验室, 天津 300071
2 中国科学院 长春光学精密机械与物理研究所 光学系统先进制造技术中国科学院重点实验室, 吉林 长春 130033
摘要
鉴于自由曲面模型的面形拟合精度在自由曲面表征以及面形初始结构选取等研究中的重要性, 本文针对基于面形斜率的高斯径向基表征模型, 研究了不同的采样点分布类型对该模型面形拟合精度的影响。采用不同采样点分布拟合离轴二次曲面和带凸起的抛物面, 结果表明采用均匀随机分布的采样点有利于实现高精度的面形拟合, 且达到一定的拟合精度后, 采样点的数目对拟合精度的影响有限。以离轴三反系统为设计实例, 对比了由不同采样方式生成初始面形后系统的像质优化结果。结果显示, 采用均匀随机型采样方式得到的初始面形进行系统优化, 最终全视场平均调制传递函数(MTF)可以达到0.72以上,远高于由边缘集中采样方式生成初始面形后系统像质的优化结果, 从而印证了理论研究结果。
Abstract
In view of the importance of surface shape fitting precision of free-form surface model in researches such as free-form surface representation and selection of initiating structure of surface shape, the influence of different sampling point distribution patterns on surface shape fitting precision of the Gaussian Radial Basis Function Based on Slope( Gaussian RBF-BS) model was investigated. An off-axis quadric surface and an bumpy paraboloid were fitted with different sampling point distributions which were uniformly random points and edged-clustered points. The results show that the uniformly random grid is better for surface shape fitting due to the high precision. The influence of sampling point quantity on fitting precision remains constant when certain fitting precision is reached. The off-axis Three Mirror Anastigmat(TMA) system was optimized experimentally by using initial surface shapes generated with different sampling methods. The results show that, by using initial surface shape generated from uniformly random sampling method for the system optimization, the average Modulation Transfer Function (MTF) of whole field of view is more than 0.72, which is much higher than that by using surface shape generated by edge cluster sampling points. Thus the theoretical research results were verified.

武鹏飞, 张赞, 郑义, 张娟, 王尧尧, 赵星, 王灵杰, 伍雁雄. 采样点分布对基于面形斜率径向基模型的自由曲面拟合精度的影响[J]. 光学 精密工程, 2016, 24(7): 1564. WU Peng-fei, ZHANG Zan, ZHENG Yi, ZHANG Juan, WANG Yao-yao, ZHAO Xing, WANG Ling-jie, WU Yan-xiong. Influence of sampling point distribution in freeform surfaces fitting with radial based function model[J]. Optics and Precision Engineering, 2016, 24(7): 1564.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!