半导体光电, 2016, 37 (4): 545, 网络出版: 2016-09-12   

光电自准直系统的建模方法研究

Research on the Model of Photoelectric Auto-collimating System
作者单位
国防科学技术大学 光电科学与工程学院, 长沙 410073
摘要
针对现有自准直模型包含系统信息量有限的不足, 提出了一种基于厚透镜对光线变换的建模方法。以应用光学中厚透镜对光线变换的理论为基础, 结合矢量运算和坐标系旋转方法建立了光电自准直系统数学模型。通过数值仿真, 对模型中包含的平面镜的转角、透镜的厚度、焦距及表面曲率半径、光源和探测器位置等系统主要参数对光电自准直系统的成像影响进行了分析, 并通过对像点几何中心的提取, 分析了透镜成像畸变对光电自准直系统测量精度的影响。文章建立的模型, 为系统参数的提取和优化、分析像点轨迹变化的影响因素以及自准直测量误差的分析和补偿提供了理论支持。
Abstract
Aiming at the deficiency of existing models with limited system parameters, proposed is a modeling method for photoelectric auto-collimating system based on beam transformation theory of thick lens. With the theory of thick lens beam transformation on applied optics, combined vector operation and coordinate system rotation method, a mathematical model for photoelectric auto-collimating system is constructed. Via numerical simulation, the effects of such factors as reflector space angle, the thickness, focal length and surface curvature radius of lens and the position coordinates of light source and detector, on the imaging results of the optoelectric auto-collimating system were analyzed. By abstracting geometrical centers of image points, the corresponding relationship between measuring error of photoelectric auto-collimating system and image trace for incremental dimension of thick lens was analyzed. The proposed model provides theoretical support for extraction and optimization of system parameters, analysis of the factors affecting image trace, error analysis and compensation of photoelectric auto-collimating system.

刘学吉, 王省书, 周金鹏, 胡峰. 光电自准直系统的建模方法研究[J]. 半导体光电, 2016, 37(4): 545. LIU Xueji, WANG Xingshu, ZHOU Jinpeng, HU Feng. Research on the Model of Photoelectric Auto-collimating System[J]. Semiconductor Optoelectronics, 2016, 37(4): 545.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!