激光与光电子学进展, 2016, 53 (10): 101401, 网络出版: 2016-10-12
硅基AlGaInP发光二极管激光加工工艺研究 下载: 506次
Research on Laser Processing Technology of Silicon Substrate AlGaInP LED
激光技术 LED芯片 固体激光器 激光加工 加工参数 laser technique LED chip solid-state laser laser processing processing parameter
摘要
采用半导体激光器制备了硅基AlGaInP发光二极管,研究了激光能量密度、重复频率及平台加工速度对加工效果的影响,利用电子显微镜等测试工具分析了经激光加工后的硅基LED芯片表面和侧面形貌等结构特性,获得了较优的加工参数。
Abstract
With semiconductor laser, a silicon substrate AlGaInP LED is prepared, and the effects of laser energy density, repetition rate, and processing speed of the platform on the processing results are studied. By means of electron microscope and other test tools, the structural characteristics of the surface and side morphologies of silicon substrate AlGaInP LED chips are analyzed, and the superior processing parameters are obtained.
肖和平, 陈亮, 马祥柱, 杨凯. 硅基AlGaInP发光二极管激光加工工艺研究[J]. 激光与光电子学进展, 2016, 53(10): 101401. Xiao Heping, Chen Liang, Ma Xiangzhu, Yang Kai. Research on Laser Processing Technology of Silicon Substrate AlGaInP LED[J]. Laser & Optoelectronics Progress, 2016, 53(10): 101401.