应用光学, 2016, 37 (3): 359, 网络出版: 2016-10-20  

用于光具座自动测量焦距的变焦光学系统设计

Design of zoom system for automatic focal length measurement on optical bench
作者单位
西安应用光学研究所,陕西 西安 710065
摘要
为了提高光具座自动测焦距时的测量精度, 设计一套连续变焦光学系统。该系统包括自准直组件和变焦组件两部分, 可以调节CCD靶面上接收到的图像大小, 得到最佳测量结果。根据设计指标要求, 在控制系统总长的基础上进行初始结构选择和像质优化。设计完成后的自准直组件焦距200 mm, 变焦组件焦距200 mm~20 mm, 对接后的变焦系统可实现图像大小1×~10×连续调节。模拟实验表明: 变焦系统像质良好, MTF曲线接近衍射极限, 弥散斑小于CCD像元大小, 可以满足实际检测需求。
Abstract
In order to improve the accuracy of automatic focal length measurement on the optical bench, a continuous zoom optical system was designed. The system is composed of self-collimation component and zoom component, and can adjust the size of image on CCD target surface till the best measurement is got. According to the technical requirements of the zoom system and based on the total control, the initial structure selection and image quality optimization were done. After the completion of the design,the focal length of self collimation component is 200 mm,the zoom component is 200 mm~20 mm and the zoom system after docking can realize the image size of 1×~10× of continuous adjustment. Simulation results show that the zoom system shows good image quality,the modulation transfer function (MTF) curve is close to the diffraction limit, and the dispersion spot is less than the size of CCD pixel. The above implies that actual testing requirements can be met.

蔡锦浩, 杨朋利, 马爱秋, 冯婕, 付晓庆, 安静, 王芝, 李文婷. 用于光具座自动测量焦距的变焦光学系统设计[J]. 应用光学, 2016, 37(3): 359. Cai Jinhao, Yang Pengli, Ma Aiqiu, Feng Jie, Fu Xiaoqing, An Jing, Wang Zhi, Li Wenting. Design of zoom system for automatic focal length measurement on optical bench[J]. Journal of Applied Optics, 2016, 37(3): 359.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!