首页 > 论文 > 红外技术 > 38卷 > 10期(pp:894-898)

基于红外锁相法的涂层脱粘缺陷检测与识别

Detection and Recognition of the Debonding Defect of Coating Based on Lock-in Thermography

  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

摘要

通过建立涂层的三维非稳态导热模型, 对涂层脱粘缺陷模型的正弦调制加热过程进行了数值计算。在不同涂层厚度与缺陷尺寸下, 分别提取缺陷中心处与无缺陷处表面温度相位并进行差值计算; 沿缺陷半径方向均匀取点, 并对涂层表面平均温度曲线进行一阶差分。研究结果表明: 通过缺陷处与无缺陷处相位差可有效检测缺陷, 通过温度一阶差分可对缺陷进行定量识别。

Abstract

In this paper, the 3D unsteady heat conduction model of coating is established, and the sinusoidal modulation heating process of the debonding defect model of coating is analyzed numerically. The phase of temperature changes on coating surface of defect center and no defects are extracted respectively and the difference with different coating thickness and defect size is calculated. First order difference is used for the processing of average temperature curves of coating surface which were extracted along the defect radius direction. The results show that coating defect could be detected and recognized well by phase difference and the first order difference of temperature.

Newport宣传-MKS新实验室计划
补充资料

中图分类号:TQ630.72, O657.33

所属栏目:红外应用

基金项目:国家自然科学基金(51275518)。

收稿日期:2016-05-27

修改稿日期:2016-08-06

网络出版日期:--

作者单位    点击查看

张金玉:火箭军工程大学, 陕西 西安 710025
马永超:火箭军工程大学, 陕西 西安 710025

备注:张金玉(1964-), 男, 副教授, 硕士研究生导师, 研究方向为热波无损检测, 智能故障诊断。

【1】王迅, 金万平, 张存林, 等. 红外热波无损检测技术及其进展[J].无损检测, 2004, 26(10): 497-501.
WANG xun, JIN Wan-ping, ZHANG Cun-lin, et al. Actuality & evolvement of infrared thermal wave nondestructive imaging technology[J]. Nondestructive Testing, 2004, 26(10):497-501.

【2】Maldague X P V. Theory and Practice of Infrared Technology for Nondestructive Testing[M]. 2001, 4(3): 307.

【3】霍雁, 赵跃进, 李艳红, 等. 脉冲和锁相红外热成像检测技术的对比性研究[J].激光与红外, 2009, 39(6): 602-604.
HUO Yan, ZHAO Yue-jin, LI Yan-hong, et al. Comparison between pulse and lock-in infrared thermography technology[J]. Laser & Infrared, 2009, 39(6):602-604.

【4】王永茂, 郭兴旺, 李日华. 红外检测中缺陷大小和深度的测量[J].激光与红外, 2002, 32(6): 404-406.
WANG Yong-mao, GUO Xing-wang, LI Ri-hua. Measuring defect diameter and depth in infrared testing[J]. Laser & Infrared, 2002, 32(6):404-406.

【5】张金玉, 孟祥兵, 杨正伟, 等. 红外锁相法涂层测厚数值模拟与分析[J].红外与激光工程, 2015(1): 6-11.
ZHANG Jin-yu, MENG Xiang-bing, YANG Zheng-wei, et al. Numerical simulation and analysis of lock-in thermography for thickness measurement of coating[J]. Infrared and Laser Engineering, 2015(1):6-11.

【6】楼淼, 吕香慧, 张宇, 等. 有机防腐涂层质量的红外热波无损检测[J]. 激光与红外, 2012, 42(5): 522-525.
LOU Miao, LV Xiang-hui, ZHANG Yu, et al. IR nondestructive testing of anti-corrosion organic coating[J]. Laser & Infrared, 2012, 42(5):522-525.

【7】Roberto Montanini, Fabrizio Freni. Non-destructive evaluation of thick glass fiber-reinforced composites by means of optically excited lock-in thermography[J]. Composites Part A, 2012, 43: 2075-2082.

【8】Peng D, Jones R. Modelling of the lock-in thermography process through finite element method for estimating the rail squat defects[J]. Engineering Failure Analysis, 2013, 28: 275-288.

【9】贾文抖, 范春利, 孙丰瑞, 等. 缺陷红外诊断的热激励方式对比研究[J].红外技术, 2014, 36(10): 849-854.
JIA Wen-dou, FAN Chun-li, SUN Feng-rui, et al. A comparative study on thermal excitations of thermographic defect inspection and identification[J]. Infrared Technology, 2014, 36(10): 849-854.

【10】孔祥谦. 有限单元法在传热学中的应用[M].北京: 科学出版社, 1986.
KONG Xiang-qian. The Application of the Finite Element Method in Heat Transfer[M]. Beijing: Science Press, 1986.

【11】GUO X, DING M. Simulation of thermal NDT of thickness and its unevenness of thermal barrier coatings[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(1): 198-203.

引用该论文

ZHANG Jinyu,MA Yongchao. Detection and Recognition of the Debonding Defect of Coating Based on Lock-in Thermography[J]. Infrared Technology, 2016, 38(10): 894-898

张金玉,马永超. 基于红外锁相法的涂层脱粘缺陷检测与识别[J]. 红外技术, 2016, 38(10): 894-898

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF