发光学报, 2016, 37 (9): 1090, 网络出版: 2016-11-23   

P3HT/PMMA双层聚合物电双稳器件的研究

Polymer Bistable Devices Based on Poly(3-hexylthiophene/Poly(methylmethacrylate) Bilayer Films
作者单位
北京交通大学光电子技术研究所 发光与光信息技术教育部重点实验室, 北京 100044
摘要
通过逐层旋涂的方法, 制备了P3HT(poly(3-hexylthiophene))与PMMA(poly(methylmethacrylate))双层器件, 并与二者的共混溶液制备的器件进行了性能对比。利用扫描电镜(SEM)表征了双层器件的横截面形貌; 利用电流-电压(I-V)以及电流-读取次数(I-t)测试, 测量了两种器件的开关比以及持续时间特性。其中, 双层器件具有更好的开关比, 可达1×103, 同时反复读写测试表明器件性能非常稳定。为了解释电双稳现象产生的机理, 对双层结构器件的电流-电压曲线进行了线性拟合, 利用器件的能级图进行分析, 得出了电荷在器件中的传输过程。研究结果表明, 可以通过电荷俘获释放理论解释P3HT/PMMA双层器件电双稳特性产生的机理。
Abstract
P3HT/PMMA bilayer device was fabricated through layer by layer spin-coating method and the device performance was greatly enhanced comparing with P3HT and PMMA single layer device. SEM image was taken to study the cross-section morphology of the bilayer film. The current-voltage (I-V) and current-repeatable times (I-t) measurements were taken to investigate the performance of the devices. The bilayer one has a better ON/OFF ratio about 1×103 and the device is quite stable. The fitting of I-V curves was utilized to analyze the charge transport process with the help of the diagram of the energy bands. The results show that the charge trapping-detrapping theory can be used to explain the operating mechanism of the bilayer device.

彭博, 曹亚鹏, 胡煜峰, 滕枫. P3HT/PMMA双层聚合物电双稳器件的研究[J]. 发光学报, 2016, 37(9): 1090. PENG Bo, CAO Ya-peng, HU Yu-feng, TENG Feng. Polymer Bistable Devices Based on Poly(3-hexylthiophene/Poly(methylmethacrylate) Bilayer Films[J]. Chinese Journal of Luminescence, 2016, 37(9): 1090.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!