为了研究磷酸锌二次掺杂聚吡咯/聚噻吩膜的光电及防腐蚀性能, 采用直接接触氧化技术在磷酸锌溶液中制备出掺杂聚吡咯/聚噻吩, 再用磷酸锌在脱掺杂聚吡咯的基础上制备出性能优良的二次掺杂聚吡咯/聚噻吩膜。采用循环伏安曲线、扫描电镜和动电位极化曲线测试了二次掺杂聚吡咯/聚噻吩/磷酸锌复合材料的微观形貌及光电性能, 并与一次掺杂及未掺杂的聚吡咯/聚噻吩进行了对比。测试结果表明: 不锈钢表面覆盖掺杂的聚吡咯/聚噻吩膜都有较好的光电性能, 以二次掺杂聚吡咯/聚噻吩膜性能为最好。与未掺杂的聚吡咯/聚噻吩高分子膜相比, 二次掺杂聚吡咯膜的腐蚀电位比纯聚苯胺膜提高了约0.989 V, 自腐蚀电流降低了约2个数量级。

As polypyrrole and polythiophene (Ppy/PTh) had unique doping and dedoping characteristics, the new nano-materials redoped and doped Ppy/PTh composites with special anti-corrosive functional groups were successfully prepared by direct oxidation in zinc phosphate solution, respectively. The microcomic structure, morphology and anti-corrosive performance of the redoped Ppy/PTh were characterized by cyclic voltammetry(CV), scanning electron microscopy(SEM) and polarization curves(PC) and compared with a doped and undoped Ppy/PTh, and their anti-corrosion mechanism was investigated theoretically. The results show that the stainless steel surfaces covered with redoped and doped Ppy/PTh composites have good anti-corrosive performance, and the redoped Ppy/PTh composites is the best. The corrosion potential of the redoped Ppy/PTh composite increases by about 0.989 V and the corrosion current is reduced by about 2 orders of magnitude to pure Ppy.