发光学报, 2016, 37 (9): 1159, 网络出版: 2016-11-23  

纳米银焊膏烧结大功率LED模块的高温可靠性研究

High Temperature Reliability of High-power LED Module Using Die Attach Material of Nano-silver Paste
作者单位
1 天津大学 材料科学与工程学院, 天津 300072
2 弗吉尼亚理工大学 材料科学与工程学院, 弗吉尼亚州 蒙哥马利 24060
摘要
介绍了一种加速老化试验模型对LED模块进行寿命预测。分别采用纳米银焊膏、锡银铜焊料、导电银胶作为芯片粘结材料。控制环境温度和正向电流, 在特定的时间测量光输出。比较了不同粘接材料及环境温度对LED老化过程的影响, 并针对老化过程进行分析推导, 建立老化数学模型, 对其进行寿命预测。试验结果表明, 纳米银焊膏粘接的模块对温度的抗性最好, 纳米银焊膏有潜力在未来固态照明、投影和其他高功率器件领域得到应用。
Abstract
A general procedure for accelerated degradation testing (ADT) was presented to predict the lifetime of three kinds of LED modules. The die attach materials of LED modules were nano-silver paste, Sn3Ag0.5Cu (Sn-based alloys), silver epoxy, respectively. The ambient temperature and forward current were controlled, and the light output at several time points was measured. The degradation mechanism of LEDs modules was analyzed. The lifetimes of LED modules under the condition of different die attach materials were predicted. The test results show that the nano-silver paste is a very promising die-attach material for the aging of multi-chip high power LED modules.

陈佳, 李欣, 孔亚飞, 梅云辉, 陆国权. 纳米银焊膏烧结大功率LED模块的高温可靠性研究[J]. 发光学报, 2016, 37(9): 1159. CHEN Jia, LI Xin, KONG Ya-fei, MEI Yun-hui, LU Guo-quan. High Temperature Reliability of High-power LED Module Using Die Attach Material of Nano-silver Paste[J]. Chinese Journal of Luminescence, 2016, 37(9): 1159.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!