光学 精密工程, 2016, 24 (10): 2400, 网络出版: 2016-11-23   

激光焊匙孔特征的近红外与X射线传感分析

Analysis of laser welding keyhole characteristics based on near-infrared high speed camera and X-ray sensing
作者单位
广东工业大学 机电工程学院,广东 广州 510006
摘要
由于多传感匙孔特征参数可以有效地反映大功率激光焊接质量状态,本文研究了匙孔特征信息的提取方法并建立了焊缝成形预测模型。以大功率盘形激光焊接304不锈钢为试验对象,应用近红外高速摄像机和X射线视觉成像系统同时提取了焊接过程中的熔池动态图像,并分割出匙孔区域。针对近红外图像,应用矩方法导出匙孔的不变矩特征,同时定义并提取匙孔面积和最前端点纵坐标两个特征; 针对X射线图像则提取匙孔深度和熵两个特征。在不同激光功率条件下得到匙孔特征并进行特征融合分析,然后建立了3个BP神经网络焊缝成形预测模型。探索了匙孔形态、焊接条件和焊接状态三者之间的联系,实现了对焊接过程的在线监测。试验结果表明,将两个传感器获取的匙孔特征信息融合并进行主成分分析变换后,熔宽和熔深的预测绝对误差平均值分别为0.18 mm和0.57 mm,比基于单个传感器获取匙孔特征建立的BP神经网络分别减小了0.03 mm和0.31 mm,显示提出的方法能够有效在线监测大功率盘形激光焊接状态。
Abstract
As the characteristic parameters of a multi-sensing keyhole reflect effectively the welding quality of high power lasers, this paper researches the extraction method of keyhole characteristic information and establishes a prediction model for welding formation. By taking a high power disk laser to weld 304 austenitic stainless steel plates for an example, a near-infrared high-speed camera and an X-ray vision imaging system were used to capture the molten images in welding processing and to obtain the keyhole region by image processing. The invariant moment characteristics were extracted from near-infrared visual images by the moment method, meanwhile the keyhole area and ordinate value of the keyhole forefront were calculated as the characteristic parameters. Depth and entropy of the keyhole were extracted from X-ray visual images. In different laser powers, the keyhole characteristics were obtained and three BP (Back Propagation) neural network models were set up through feature fusion of all the characteristic parameters. The relationship between the keyhole formation, welding condition and welding state was explored and the on-line monitoring for welding process was implemented. Experimental results show that the average absolute value of relative errors between predictive and measured values of weld width and penetration are 0.18 mm and 0.57 mm, respectively through fusion analysis and principal component analysis on characteristic parameters of two sensors, and they have been reduced by about 0.03 mm and 0.31 mm as compared with that of a single sensor. The proposed method can be applied to monitoring high-power disk laser welding quality in real time.

高向东, 李竹曼, 游德勇, 张南峰. 激光焊匙孔特征的近红外与X射线传感分析[J]. 光学 精密工程, 2016, 24(10): 2400. GAO Xiang-dong, LI Zhu-man, YOU De-yong, ZHANG Nan-feng. Analysis of laser welding keyhole characteristics based on near-infrared high speed camera and X-ray sensing[J]. Optics and Precision Engineering, 2016, 24(10): 2400.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!