太赫兹科学与电子信息学报, 2016, 14 (5): 738, 网络出版: 2016-11-30  

电磁脉冲微分测量信号的数值积分

Processing of electromagnetic pulse signal based on numerical integration
作者单位
西北核技术研究所强脉冲辐射环境模拟与效应国家重点实验室,陕西 西安 710024
摘要
电磁脉冲(EMP)探测器测量结果为微分信号的情况下,需要将测量信号进行积分。测量信号中的噪声在数值积分被放大,产生的累积误差会引起波形的严重失真。同时,由于被测信号上升沿与下降沿宽度不一致,测量到的微分信号正、负峰值以及脉冲宽度不对称,采取消除一次趋势项的方法不能完全消除积分信号的线性趋势。本文结合脉冲电磁场的微分测量结果,在分析了误差传递规律和被测信号特征的基础上,应用信号微调的方法对数值积分结果进行修正,修正后的积分结果消除了线性趋势,能够反映出被测信号的基本特征,为高斯脉冲、方波的微分信号的数值积分提供了一种很好的途径。
Abstract
The processing of differential signal is an important task in Electromagnetic Pulse(EMP) measurement. Numerical integration is one of the ways to process the differential data, but the noise accumulation of measurement signal and the characteristics of original waveform will result in serious distortion to the integration waveform. With the EMP measurement data, on the basis of analysis of error transferring rules and the waveform characteristics, the integration waveform correction method based on piecewise adjustment is adopted in the paper. The results indicate that the correction waveforms are properly to eliminate the trend of errors, and the method is helpful in EMP differential measurement.

李进玺, 郭景海, 赵墨, 刘逸飞, 吴伟. 电磁脉冲微分测量信号的数值积分[J]. 太赫兹科学与电子信息学报, 2016, 14(5): 738. LI Jinxi, GUO Jinghai, ZHAO Mo, LIU Yifei, WU Wei. Processing of electromagnetic pulse signal based on numerical integration[J]. Journal of terahertz science and electronic information technology, 2016, 14(5): 738.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!