应用激光, 2016, 36 (6): 703, 网络出版: 2017-01-23  

基于红外热像仪的激光-电弧复合焊接温度场的测量及Matlab转换

Measurement of Temperature Field in Laser-arc Hybrid Welding based on Infrared Thermal Imaging System and Matlab Transformation
作者单位
长春理工大学机电工程学院, 吉林 长春 130022
摘要
采用SC7750LW型红外热像仪采集了激光-电弧复合焊接高氮奥氏体不锈钢的熔池表面温度, 通过Matlab数学软件建立了基于红外热像图的三维温度分布转换程序。研究了不同热输入条件下焊缝凝固速度与焊缝凝固模式的关系, 并预测焊缝形成气孔倾向。研究了焊缝温度场与焊缝熔宽之间的相关性, 获得了焊缝熔宽值与红外热图的关系, 其熔宽计算值与实际值比较吻合。
Abstract
In this paper, the surface temperature of molten pool of high nitrogen austenitic stainless steel was collected by SC7750LW infrared thermal imaging system. The three-dimensional temperature distribution conversion program based on infrared thermal image was established by Matlab software. The relationship between solidification rate and solidification mode of the weld under different heat input conditions was studied. Study on the correlation between weld temperature field and weld width, the weld width value and infrared thermography was abtained, the weld width calculated results agree well with the actual value.

陈实现, 刘双宇, 刘凤德, 张宏, 李彦清. 基于红外热像仪的激光-电弧复合焊接温度场的测量及Matlab转换[J]. 应用激光, 2016, 36(6): 703. Chen Shixian, Liu Shuangyu, Liu Fengde, Zhang Hong, Li Yanqing. Measurement of Temperature Field in Laser-arc Hybrid Welding based on Infrared Thermal Imaging System and Matlab Transformation[J]. APPLIED LASER, 2016, 36(6): 703.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!