发光学报, 2017, 38 (2): 213, 网络出版: 2017-02-09   

掺铒聚合物狭缝波导放大器的增益特性研究

Simulation of Gain Properties for Slot Waveguide Amplifiers Based on Erbium-doped Polymers
作者单位
1 深圳大学 电子科学与技术学院, 广东省微纳光机电工程技术重点实验室,光电子器件与系统教育部/广东省重点实验室, 广东 深圳 518060
2 吉林大学 电子科学与工程学院, 集成光电子学国家重点联合实验室吉林大学实验区, 吉林省光通信用聚合物波导器件工程实验室, 吉林 长春 130012
摘要
设计了一种高浓度稀土铒掺杂聚合物填充硅狭缝结构的平面光波导放大器(工作波长1 550 nm,泵浦波长1 480 nm),能够在低泵浦下获得高增益,可以应用于硅基光互联的损耗补偿。通过扫描电镜照片观察发现,合成的铒掺杂聚合物材料具有良好的纳米狭缝填充能力。考虑铒离子的合作上转换和激发态吸收,利用铒离子四能级跃迁模型,建立原子速率方程和光功率传输方程,数值仿真分析了聚合物光学性质、狭缝波导结构参数及信号光泵浦光功率等放大器增益特性的影响因素。这种具有纳米截面尺寸的光波导放大器,获得4.5 dB的信号光相对增益仅需要1.5 mW 的泵浦光,展现了良好的集成光学应用前景。为了进一步提高增益,引入了多层狭缝结构,四层狭缝波导的重叠积分因子比一层狭缝的高42%。
Abstract
A slot waveguide amplifier based on high concentration erbium-doped polymers, working at 1 550 nm wavelength under 1 480 nm pumping, is presented to realize high optical gains with low pump powers for the loss compensation in the silicon-based optical interconnection. The influence factors of the gain properties, such as the optical properties of the polymers, the structure sizes of the slot waveguides, and the signal and pump powers, are numerically simulated. This structure, with the nanometer scale, only needs a 1.5 mW pump to obtain a 4.5 dB gain, which exhibits promising applications in integrated optical systems. Further, multiple-layer slot structures are introduced to get higher gains, and the over-lapping integral factor of the four-layer slot waveguides is 42% larger than that of the one-layer waveguides.

李彤, 张美玲, 王菲, 张大明, 汪国平. 掺铒聚合物狭缝波导放大器的增益特性研究[J]. 发光学报, 2017, 38(2): 213. LI Tong, ZHANG Mei-ling, WANG Fei, ZHANG Da-ming, WANG Guo-ping. Simulation of Gain Properties for Slot Waveguide Amplifiers Based on Erbium-doped Polymers[J]. Chinese Journal of Luminescence, 2017, 38(2): 213.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!