半导体光电, 2017, 38 (1): 16, 网络出版: 2017-03-29  

有机酸修饰ITO对OLED器件性能的影响

Effects of Modified ITO Using Organic Acids on the Performance of OLEDs
胡俊涛 1,2,*杨劲松 1,2冯鹏 1,2梅文娟 1,2牛永鹏 1,3
作者单位
1 特种显示技术国家工程实验室 特种显示技术教育部重点实验室 省部共建现代显示技术国家重点实验室, 合肥 230009
2 合肥工业大学 光电技术研究院, 合肥 230009
3 中航华东光电有限公司, 安徽 芜湖 241002
摘要
分别采用二氯苯氧乙酸和溴乙酸对ITO表面进行修饰, 研究其对OLED器件(ITO/PVK/ FIrPic∶SimCP/TPBi/LiF/Al)性能的影响。结果显示, 相较于未修饰的器件, 采用二氯苯氧乙酸修饰后的器件最大亮度由673.4cd/m2提升至1875.2cd/m2, 同时器件的启亮电压由6.2V降至5.3V。研究发现, 有机酸处理能够改变ITO的表面能和功函数, 一方面改变ITO和后续膜层的接触性能, 影响后续膜层的成膜; 另一方面也可以有效减少ITO与有机层间的势垒, 提升载流子注入。这种用有机酸修饰ITO阳极的方法工艺简单, 能有效降低空穴注入势垒, 优化ITO和有机层的接触性能, 对器件性能的提升起到一定的促进作用。
Abstract
The performance of OLED devices(ITO/PVK/FIrPic∶SimCP/TPBi/LiF/Al)was studied by making modification of ITO surface with bromoacetic acid and 2,4-Dichlorophenoxyacetic acid, respectively. The results show that, compared with the devices without organic acid modification, the maximum brightness of the device increases from 673.4 to 1875.2cd/m2, while the turn-on voltage of the device reduces from 6.2 to 5.3V. It is considered that the organic acids can change the surface energy and the work function of ITO. On the one hand, it changes the contact performance of the ITO and the subsequent film, influencing the subsequent coating film; on the other hand, it effectively reduces the barrier between the ITO and organic layer, improving the carrier injection. This method is simple and effective in reducing the hole injection barrier and proving the contact performance of the ITO and the subsequent film, which plays a certain role in promoting the devices’ performance.

胡俊涛, 杨劲松, 冯鹏, 梅文娟, 牛永鹏. 有机酸修饰ITO对OLED器件性能的影响[J]. 半导体光电, 2017, 38(1): 16. HU Juntao, YANG Jinsong, FENG Peng, MEI Wenjuan, NIU Yongpeng. Effects of Modified ITO Using Organic Acids on the Performance of OLEDs[J]. Semiconductor Optoelectronics, 2017, 38(1): 16.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!