红外, 2017, 38 (2): 11, 网络出版: 2017-03-29  

512×8元双波段TDI红外探测器的低噪声成像电路设计

Design of the Acquisition System with Low Noise Based on 512×8 Dual Band TDI IRFPA
李锋 1,2,3,*董峰 2,3冯旗 2,3
作者单位
1 中国科学院大学,北京 100049
2 中国科学院上海技术物理研究所,上海 200083
3 中国科学院红外探测与成像技术重点实验室,上海 200083
摘要
设计了一种基于512×8元双波段TDI红外 焦平面探测器的低噪声实时成像数据采集系统。根据器件内 部的电路结构以及输出模拟信号的特点,设计了一种由偏置电压、驱 动电路、模数转换电路和数字信号处理模块等组成的低噪 声采集电路。经噪声测试可知,在26℃的室温下,电路噪 声为0.02 ~ 0.18 mV;当积分时间为300 s时,短波红外和中波红外探测 器各个像元的噪声电压分别为2.5 ~ 4.5 mV和8 ~ 10 mV,其 各个像元的信噪比分别为52 ~ 57 dB和43 ~ 48 dB。结果表明,该系统具 有良好的噪声特性,可以满足实际的工程应用需求。
Abstract
A low noise real-time imaging data acquisition system based on a 512×8 dual band TDI IRFPA is designed. According to the characteristics of internal circuits and output analog signals, a low noise collection circuit composed ofbias voltage, drive circuit, A/D conversion circuit and digital signal processing module etc is designed. It is found in the noise test that at the room temperature of 26 ℃, the noise of the circuit is 0.02 mV to 0.18 mV. For the integration time of 300 s, the noise voltage of each shortwave infrared detector element and that of each mid-wave infrared detector element are 2.5 mV to 4.5 mV and 8 mV to 10 mV respectively. Their signal-to noise ratios are 52 dB to 57 dB and 43 dB to 48 dB respectively. The test results show that the system has good noise characteristics and can meet the requirements of practical engineering application.

李锋, 董峰, 冯旗. 512×8元双波段TDI红外探测器的低噪声成像电路设计[J]. 红外, 2017, 38(2): 11. LI Feng, DONG Feng, FENG Qi. Design of the Acquisition System with Low Noise Based on 512×8 Dual Band TDI IRFPA[J]. INFRARED, 2017, 38(2): 11.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!