液晶与显示, 2017, 32 (4): 269, 网络出版: 2017-05-03   

TFT-LCD Stage Mura的研究与改善

Research and improvement of TFT-LCD Stage Mura
作者单位
北京京东方显示技术有限公司, 北京 100176
摘要
TFT-LCD面板在屏幕上有斑点或波浪状Mura, 影响液晶显示器的品质, 经过图形匹配, 缺陷与曝光机机台形貌匹配。通过对异常区域特性分析, 发现异常区域的BM CD、BM 像素间距存在异常。对原因进行模型分析: 玻璃在曝光机基台上局部区域发生弯曲, 曝光距离变短, 致使BM PR受光区域变小, BM CD会偏小, 进而导致区域性透过光不均一产生Mura; 玻璃弯曲后BM 像素间距相对于设计位置也会发生变化, 从而导致漏光产生Mura。经过实验验证, BM CD和像素间距的偏差主要由机台凸起导致glass弯曲引起, 可以通过降低吸附压力和研磨机台, 来改善CD差异和像素间距偏移, 同时像素间距偏移漏光, 也可以通过增加CD来改善。最终通过BM CD增加、研磨机台和降低吸附压力措施, Stage Mura不良率由10.05%下降至0.11%。
Abstract
The spotted and striped Mura on TFT-LCD Panel degraded product quality. The defect pattern matched the exposure stage by analyzing. It was found that the BM CD and Pixel Pitch are abnormal through researching the abnormal area characteristic parameter. Model analysis based on Stage Mura indicated that the bending of glass on stage shorted the Exposure gap, which shrank the Exposure area, and minified CD and formed transmittance difference. The bending of glass also shifted the Pixel Pitch, which resulted in light leak and Mura. The experiment showed that the difference of BM CD and Pixel Pitch were caused by Stage flatness, which could be improved by polishing stage and decreasing vacuum adsorption pressure. The light leak of Pixel Pitch could be also improved by extending CD. Finally, the CF BM stage Mura was improved greatly by CD increasing, stage polishing, and vacuum adsorption pressure decreasing, and the Stage Mura defect ratio decreased from 105% to 0.11%.

肖洋, 周鹏, 闫润宝, 郑云友, 齐勤瑞, 魏崇喜, 章旭, 张然. TFT-LCD Stage Mura的研究与改善[J]. 液晶与显示, 2017, 32(4): 269. XIAO Yang, ZHOU Peng, YAN Run-bao, ZHENG Yun-you, QI Qin-rui, WEI Chong-xi, ZHANG Ran, ZHANG Xu. Research and improvement of TFT-LCD Stage Mura[J]. Chinese Journal of Liquid Crystals and Displays, 2017, 32(4): 269.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!