激光与光电子学进展, 2017, 54 (9): 091203, 网络出版: 2017-09-06
夜视兼容的LED液晶显示器背光模组的研究 下载: 676次
Study on Night Vision Compatible Backlight Module of LED Liquid Crystal Display
测量 液晶显示器 夜视兼容 红外LED 背光模组 measurement liquid crystal display night vision compatibility infrared LED backlight module
摘要
为了提高夜视兼容的液晶显示器(LCD)显示屏的显示效果, 在使用红绿蓝三色LED为背光源的基础上, 增加了红外LED, 将不同的LED搭配成在不同模式下使用的两套光源。根据10.4 in(1 in=2.54 cm)背光源的亮度和均匀性的要求, 将背光源当作朗伯发光体来计算亮度, 以便于选择LED的类型, 确定LED的数量和排列方式, 合理选择光学膜片及设计背光模组的结构。由于红外LED的发光功率可调节, 在夜视兼容模式下, 不仅可以通过夜视仪看清LCD显示屏上的信息, 而且用裸眼也可以轻易看清显示屏上的信息。通过TracePro软件进行仿真并分析, 结果发现设计的背光模组同时满足了LCD显示屏的强光下可视和夜视兼容两项要求。
Abstract
In order to improve the effect of night vision compatible liquid crystal display (LCD), infrared LED is used on top of the RGB three-color LED as the backlight source, and different LEDs are arranged to form two sets of light sources at different modes. According to the brightness and uniformity requirements of the 10.4 in (1 in=2.54 cm) backlight source, backlight is used as a Lambert luminous body to select the type of LED by calculation, to determine the number and arrangement of LED, to select the optical films reasonably, and to design the structure of the backlight module. Because the luminous power of infrared LED is adjustable, in night vision compatible mode, the information can be seen on the LCD screen not only through night vision device but also with naked eyes. Simulation and analysis by TracePro software show that the designed backlight module meets the two requirements of the LCD screen of visible features under the bright light and night vision compatibility.
朱向冰, 崔海田, 钱立勇, 王元航. 夜视兼容的LED液晶显示器背光模组的研究[J]. 激光与光电子学进展, 2017, 54(9): 091203. Zhu Xiangbing, Cui Haitian, Qian Liyong, Wang Yuanhang. Study on Night Vision Compatible Backlight Module of LED Liquid Crystal Display[J]. Laser & Optoelectronics Progress, 2017, 54(9): 091203.