发光学报, 2017, 38 (5): 630, 网络出版: 2017-09-21   

基于微纳光纤-单壁碳纳米管可饱和吸收体的被动调Q掺镱光纤激光器

Passively Q-switched Yb3+-doped Fiber Laser Based on Microfiber-single Wall Carbon Nanotube Saturable Absorber
作者单位
1 中国科学院国家天文台 长春人造卫星观测站, 吉林 长春 130117
2 吉林大学 集成光电子国家重点联合实验室吉林大学实验区, 吉林 长春 130012
摘要
为实现具有高脉冲能量的调Q脉冲激光输出, 利用微纳光纤-单壁碳纳米管复合的方法制备可饱和吸收体, 并对基于该类型可饱和吸收体器件的被动调Q掺镱光纤激光器进行研究。采用拉伸法将普通单模石英光纤拉制成微纳光纤, 将其与单壁碳纳米管溶液复合, 进一步制备成全光纤集成型器件。将该器件置于环形腔掺镱光纤激光器中, 利用976 nm半导体激光器作为抽运源。当抽运功率为53 mW时, 实现了调Q脉冲激光输出, 激光中心波长为1 039 nm。进一步提升抽运功率至76 mW, 可获得脉冲宽度为3.1 μs、重复频率为25.5 kHz、单脉冲能量为941 nJ的调Q脉冲激光输出。研究表明, 利用微纳光纤制备的可饱和吸收体器件具有较高的损伤阈值, 可用于实现高脉冲能量的激光输出。
Abstract
In order to realize Q-switched fiber laser with high energy pulse, passively Q-switched Yb3+-doped fiber laser based on the microfiber-single wall carbon nanotube (SWCNT) saturable absorber (SA) was reported. The microfiber was fabricated by drawing the single mode silica fiber and then composite with the SWCNT solution, further on preparation of all fiber integrated devices. By inserting the SA in a Yb3+-doped fiber laser ring cavity pumped by a 976 nm laser diode, stable passively Q-switched pulse train occurs at 53 mW incident pump power. Increasing the pump power to 76 mW, 3.1 μs pulses at 1 039 nm with a repetition rate of 25.5 kHz are obtained, which corresponds to single pulse energy of 941 nJ. This result shows that the microfiber based SA can enhance the threshold of material damage and obtain high energy pulse laser.

康喆, 刘明奕, 刘承志, 李振伟, 马磊, 许阳, 秦伟平, 秦冠仕. 基于微纳光纤-单壁碳纳米管可饱和吸收体的被动调Q掺镱光纤激光器[J]. 发光学报, 2017, 38(5): 630. KANG Zhe, LIU Ming-yi, LIU Cheng-zhi, LI Zhen-wei, MA Lei, XU Yang, QIN Wei-ping, QIN Guan-shi. Passively Q-switched Yb3+-doped Fiber Laser Based on Microfiber-single Wall Carbon Nanotube Saturable Absorber[J]. Chinese Journal of Luminescence, 2017, 38(5): 630.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!