Optimization and simulation are performed for a polymer four-port microring optical router with three channel wavelengths, which contains four-group basic routing elements with two different ring radii. In terms of microring resonance theory, coupled mode theory and transfer matrix method, expressions of output power of basic routing element and optical router are derived. In order to realize single-mode propagation, low optical transmission loss and phase match between microring waveguide and channel waveguide, the device parameters are optimized. With the selected three channel wavelengths of 1550 nm, 1552 nm and 1554 nm, characteristics are calculated and analyzed, including output spectrum, insertion loss and crosstalk. Simulation results indicate that the device has 12 possible I/O routing paths, the insertion losses of three channel wavelengths along their routing paths are within the range of 0.02-0.61 dB, the maximum crosstalk between the on-port along each routing path and other off-ports is less than -39 dB, and the device footprint size is ~0.13 mm₂. Based on the proposed structure, through proper selection on ring radius, the routing structure can also be used for other channel wavelengths. Therefore, the designed structure shows wide applications in integrated optical networks-on-chip (NoC).