光电子快报(英文版), 2016, 12 (3): 233, Published Online: Oct. 12, 2017  

Fabrication of hydrophobic structures on coronary stent surface based on direct three-beam laser interference lithography

Author Affiliations
1 School of Optoelectronic Engineering, Changchun University of Science and Technology, Changchun 130022, China
2 The Second Hospital of Jilin University, Changchun 130041, China
Abstract
To solve the problems with coronary stent implantation, coronary artery stent surface was directly modified by three-beam laser interference lithography through imitating the water-repellent surface of lotus leaf, and uniform micro- nano structures with the controllable period were fabricated. The morphological properties and contact angle (CA) of the microstructure were measured by scanning electron microscope (SEM) and CA system. The water repellency of stent was also evaluated by the contact and then separation between the water drop and the stent. The results show that the close-packed concave structure with the period of about 12 μm can be fabricated on the stent surface with special parameters (incident angle of 3°, laser energy density of 2.2 J·cm-2and exposure time of 80 s) by using the three-beam laser at 1 064 nm, and the structure has good water repellency with CA of 120°.

GAO Long-yue, ZHOU Wei-qi, WANG Yuan-bo, WANG Si-qi, BAI Chong, LI Shi-ming, LIU Bin, WANG Jun-nan, CUI Cheng-kun, LI Yong-liang. Fabrication of hydrophobic structures on coronary stent surface based on direct three-beam laser interference lithography[J]. 光电子快报(英文版), 2016, 12(3): 233.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!