光电子技术, 2017, 37 (2): 94, 网络出版: 2017-12-25   

基于光电倍增管模块的探测系统增益-噪声最优化研究

Research on Gain-noise Optimization of Detection System Based on Photomultiplier Tube Modules
作者单位
合肥工业大学 电气与自动化工程学院,合肥 230009
摘要
采用光电倍增管模块和电流放大器搭建了光电检测系统。详细推理了光电倍增管模块的控制电压和内部增益的关系、光电倍增管模块的信噪比以及电流放大器的信噪比。在总的光子-电压增益(3×109)和频率带宽(200 kHz)固定的前提下,对光电倍增管模块的控制电压(内部增益)和电流放大器的增益进行了多组配比和噪声测试。测试数据表明,当控制电压为0.42 V,前置放大器增益为105 V/A,电压放大器增益为4 V/V时,系统的输出噪声最小。
Abstract
A photoelectric detection system was built using the photomultiplier tube module and current amplifier.The relationship between the control voltage and the intrinsic gain of the photomultiplier module was deduced in detail, and the signal-to-noise ratio of the photomultiplier module and the current amplifier were described respectively.Under the premise of the total photon-to-voltage gain (3×109) and the frequency bandwidth (200 kHz), the control voltage (internal gain) of the photomultiplier tube module and the gain of the current amplifier were subjected to multiple gain allocations and noise tests.The test data show that when the control voltage is 0.42 V, the preamplifier gain is 105 V/A, the voltage amplifier gain is 4 V/V, and the system output noise is minimal.

刘冬梅, 张现乾, 赵蓓蕾. 基于光电倍增管模块的探测系统增益-噪声最优化研究[J]. 光电子技术, 2017, 37(2): 94. LIU Dongmei, ZHANG Xianqian, ZHAO Beilei. Research on Gain-noise Optimization of Detection System Based on Photomultiplier Tube Modules[J]. Optoelectronic Technology, 2017, 37(2): 94.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!