应用激光, 2017, 37 (6): 859, 网络出版: 2018-01-10   

清洗速度对激光清洗钛合金积碳表面的形貌与组成的影响

Effect of Laser Cleaning Speed on Morphology and Composition of Carbon-deposited Surface of Titanium Alloy
作者单位
1 装甲兵工程学院机械产品再制造国家工程研究中心, 北京 100072
2 北京国科世纪激光技术有限公司, 北京 100192
摘要
考察了不同清洗速度下激光清洗钛合金积碳表面的形貌、元素组成以及相对含量的变化。结果发现: 清洗速度对激光清洗钛合金积碳表面的形貌以及所含的C元素相对含量有很大影响。清洗速度为3.0 cm2/s时, 钛合金表面会出现明显的激光光斑痕迹, 表面出现烧伤现象; 清洗速度为7.0 cm2/s时, 激光清洗表面所含C元素的相对含量为0 Wt%, 激光清洗效果最好。
Abstract
The morphology, element composition and relative content of the carbon deposition surface of titanium alloy of laser cleaning are investigated at different cleaning speeds. The results show that the cleaning speed had a great influence on the morphology of the carbon deposition surface of titanium alloy and the relative content of the C element. When the cleaning speed is 3.0 cm2/s, the surface of the titanium alloy will appear obvious laser spot traces, the surface is burned. When the cleaning speed is 7.0 cm2/s, the relative content of the element C in the laser cleaning surface is 0 Wt%, the effect of laser cleaning is best.

乔玉林, 黄克宁, 梁秀兵, 胡振峰, 张国新, 张晶. 清洗速度对激光清洗钛合金积碳表面的形貌与组成的影响[J]. 应用激光, 2017, 37(6): 859. Qiao Yulin, Huang Kening, Liang Xiubing, Hu Zhenfeng, Zhang Guoxin, Zhang Jing. Effect of Laser Cleaning Speed on Morphology and Composition of Carbon-deposited Surface of Titanium Alloy[J]. APPLIED LASER, 2017, 37(6): 859.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!