发光学报, 2018, 39 (2): 180, 网络出版: 2018-03-14   

电致发光用于大功率半导体激光器失效模式分析

Failure Mode Analysis of High-power Laser Diodes by Electroluminescence
作者单位
1 中国科学院半导体研究所 光电子器件国家工程研究中心, 北京100083
2 中国科学院大学 材料科学与光电技术学院, 北京100049
摘要
利用电致发光(EL)的方法, 研究了突然失效的975 nm大功率应变量子阱激光器。起初, 我们以为激光器失效是由于腔面发生了突然光学灾变(COMD)。然而, 通过EL实验, 发现其中一部分激光器腔面没有任何损伤, 而内部发生了突然光学灾变(COBD), 为工艺的进一步改善指明了方向。对90只发生COD的激光器进行EL成像, 发现暗线缺陷(DLD)起始于腔面或是激光器内部。DLD是严重的非辐射复合区, 通常沿着有源区延伸出几个分支, 造成激光器功率急剧下降。详细分析了不同COD模式的特征并进行了对比。并进一步分析了两种典型COD模式发生的原因, 然后给出了抑制COD和提高大功率半导体激光器性能的建议。
Abstract
We performed failure mode analysis (FMA) on the suddenly failed high-power 975 nm strained quantum well diode lasers. At first, we believed that the lasers suffered catastrophic optical damage (COD) at the mirror facets, which is called COMD. However, by electroluminescence (EL), we found that some lasers suffered COD only in the bulk without any damage at both facets, which is called COBD, thus guiding our further improvement. Among all the 90 lasers that suffered COD, the EL images demonstrate that the dark line defects (DLDs) can originate from the facets or the bulk. These DLDs are highly non-radiative region and usually confined in the active region with several branches, which leads to the dramatic decrease of the optical power. And to the different COD modes, the common features of DLDs were interpreted and compared in detail. Furthermore, the causes to the two typical COD modes were analyzed, and suggestions were made to suppress the COD process and further improve the high-power laser diodes.

刘启坤, 孔金霞, 朱凌妮, 熊聪, 刘素平, 马骁宇. 电致发光用于大功率半导体激光器失效模式分析[J]. 发光学报, 2018, 39(2): 180. LIU Qi-kun, KONG Jin-xia, ZHU Ling-ni, XIONG Cong, LIU Su-ping, MA Xiao-yu. Failure Mode Analysis of High-power Laser Diodes by Electroluminescence[J]. Chinese Journal of Luminescence, 2018, 39(2): 180.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!