首页 > 论文 > 激光与光电子学进展 > 55卷 > 6期(pp:61404--1)

铜-镍多层复合薄板激光弯曲成形工艺建模与优化

Process Modeling and Optimization of Laser Bending Forming of Copper-Nickel Multilayer Composite Sheets

  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

摘要

基于参数实验设计, 对影响铜-镍多层复合薄板激光弯曲成形的工艺参数进行了筛选;采用中心复合实验设计进行了实验规划, 利用响应面建立了工艺参数与弯曲角度之间的数学模型, 揭示了各工艺参数的交互式影响规律。采用满意度函数对工艺参数进行了优化, 得出了理想的参数组合。

Abstract

The process parameters of laser bending forming of copper-nickel composite sheets are screened based on the experimental design of parameters. The central composite design of experiments is chosen for the experimental plan and the response surface methodology is adopted for the establishment of mathematical model among all process parameters. The interactive influence law of each process parameter is disclosed. The satisfaction function is used to optimize the process parameters and the optimal combination of parameters is obtained.

Newport宣传-MKS新实验室计划
补充资料

中图分类号:TN249

DOI:10.3788/lop55.061404

所属栏目:激光器与激光光学

基金项目:国家自然科学基金(51675243), 常州市高技术研究重点实验室资助项目(CM20153001)

收稿日期:2017-11-30

修改稿日期:2017-12-15

网络出版日期:--

作者单位    点击查看

张国栋:江苏大学机械工程学院, 江苏 镇江 212013
王霄:江苏大学机械工程学院, 江苏 镇江 212013
谭文胜:常州信息职业技术学院常州市大型塑料件智能化制造重点实验室, 江苏 常州 213164
孙跃东:江苏大学机械工程学院, 江苏 镇江 212013
姜英杰:江苏大学机械工程学院, 江苏 镇江 212013
刘会霞:江苏大学机械工程学院, 江苏 镇江 212013

联系人作者:王霄(wx@ujs.edu.cn)

备注:张国栋(1990-), 男, 硕士研究生, 主要从事激光加工和数字化设计与制造方面的研究。E-mail: 15852933653@163.com

【1】Cui C, Chen Y L, Fu S C, et al. Study on laser multi-channel scanning forming of aluminum alloy cross stiffened panel[J]. Defense Manufacturing Technology, 2017(2): 28-33.
崔超, 陈亚利, 付守冲, 等. 铝合金交叉筋壁板激光多道扫描成形研究[J]. 国防制造技术, 2017(2): 28-33.

【2】Yang L J, Chen Y L, Wei Y J, et al. Experimental investigation of laser induced thermoforming of 5A06 aluminum alloy sheet[J]. Science Technology and Engineering, 2016, 16(33): 18-23.
杨立军, 陈亚利, 魏裕君, 等. 5A06铝合金平板激光诱导热成形试验研究[J]. 科学技术与工程, 2016, 16(33): 18-23.

【3】Gisario A, Barletta M, Venettacci S, et al. Progress in tridimensional (3d) laser forming of stainless steel sheets[J]. Lasers in Manufacturing & Materials Processing, 2015, 2: 148-163.

【4】Paunoiu V, Squeo E A, Quadrini F, et al. Laser bending of stainless steel sheet metals[J]. International Journal of Material Forming, 2008, 1(s1): 1371-1374.

【5】Liu J, Sun S, Guan Y J. Numerical study on the laser bending of stainless steel foil with pre-stresses[J]. Chinese Journal of Lasers, 2008,35(8): 1265-1270.
刘杰, 孙胜, 管延锦. 预应力作用下微尺度激光弯曲成形的数值模拟[J]. 中国激光, 2008, 35(8): 1265-1270.

【6】Shi Y J. Research on laser bending mechanism and forming process plan for 3D curved plates[D]. Shanghai: Shanghai Jiaotong University, 2007.
石永军. 激光热变形机理及复杂曲面板材热成形工艺规划研究[D]. 上海: 上海交通大学, 2007.

【7】Wang X Y, Luo Y H, Wang J, et al. Scanning path planning for laser bending of straight tube into coil-shape tube[J]. International Journal of Advanced Manufacturing Technology, 2013, 69(1/2/3/4): 909-917.

【8】Kant R, Bhuyan P M, Joshi S N. Experimental studies on curvilinear laser bending of thin sheets[C]. International Conference on Advanced Technologies for Societal Application, 2016: 539-548.

【9】Wu D J, Ma G Y, Liu S, et al. Experiments and simulation on laser bending of silicon sheet with different thicknesses[J]. Applied Physics A, 2010,101(3): 517-521.

【10】Genna S, Papa I, Leone C. A preliminary study on the characterization of laser-bending process of AISI 304 steel sheets by acoustic emission technique[J]. International Journal of Advanced Manufacturing Technology, 2017, 92(9/10/11/12): 4111-4119.

【11】Lambiase F. Ananalytical model for evaluation of bending angle in laser forming of metal sheets[J]. Journal of Materials Engineering and Performance, 2012, 21(10): 2044-2052.

【12】Chen Y L, Yang L J, Fu S C, et al. Simulation of laser bending of cross-stiffened integral panel[J]. Chinese Journal of Lasers, 2017, 44(10): 1002004.
陈亚利, 杨立军, 付守冲, 等. 交叉筋壁板激光弯曲成形仿真研究[J]. 中国激光, 2017, 44(10): 1002004.

【13】Li P, Liu B G, Liu H X. Process model for laser bending shaping of tubes[J]. Laser & Optoelectronics Progress, 2017, 54(8): 081403.
李品, 刘保光, 刘会霞. 管材激光弯曲成形工艺模型[J]. 激光与光电子学进展, 2017, 54(8): 081403.

【14】Ding L, Liu H X, Wang H J, et al. Experimental study of thin aluminum-lithium alloy sheet metal laser forming with semiconductor laser[J]. Chinese Journal of Lasers, 2010, 37(8): 2143-2148.
丁磊, 刘会霞, 王鹤军, 等. 铝锂合金薄板半导体激光弯曲成形试验研究[J]. 中国激光, 2010, 37(8): 2143-2148.

【15】Li J H, Su Z C, Yao F P, et al. Application of BP neural network in laser bending forming of aluminum alloy sheet[J]. Hot Working Technology, 2017, 46(1): 158-161.
李金华, 苏智超, 姚芳萍, 等. BP神经网络在铝合金板材激光弯曲成形中的应用[J]. 热加工工艺, 2017, 46(1): 158-161.

【16】Cheng X Z. Review of laminar composite metal material manufacturing technique[J]. Nonferrous Metal Materials and Engineering, 2017, 38(2): 63-66.
陈兴章. 层状金属复合材料技术创新及发展趋势综述[J]. 有色金属材料与工程, 2017, 38(2): 63-66.

【17】Manesh H D, Shahabi H S. Effective parameters on bonding strength of roll bonded Al/St/Al multilayer strips[J]. Journal of Alloys and Compounds, 2009, 476(1/2): 292-299.

【18】Edwardson S P, Dearden G, French P, et al. Laser forming of metal laminate composites materials[C]. 22nd International Congress on Applications of Lasers & Electro-Optics, 2003, 95(595): 107-116.

【19】Edwardson S P, French P, Dearden G, et al. Laser forming of fibre metal laminates[J]. Lasers in Engineering, 2005, 15: 233-255.

【20】Carey C, Cantwell W J, Dearden G, et al. Towards a rapid, non-contact shaping method for fibre metal laminates using a laser source[J]. International Journal of Advanced Manufacturing Technology, 2010, 47(5/6/7/8): 557-565.

【21】Shen H, Yao Z Q, Hu J. Numerical analysis of metal/ceramic bilayer materials systems in laser forming[J]. Computational Materials Science, 2009, 45(2): 439-442.

【22】Seyedkashi S M H, Gollo M H, Biao J, et al. Laser bendability of SUS430/C11000/SUS430 laminated composite and its constituent layers[J]. Metals and Materials International, 2016, 22(3): 527-534.

【23】Zhang P, Wang X Y. Element diffusion and material properties in transition layer of bending zone in laminated plates[J]. Chinese Journal of Lasers, 2016, 43(7): 0702001.
张攀, 王续跃. 层合板激光弯折区过渡层元素扩散及材料性能[J]. 中国激光, 2016, 43(7): 0702001.

【24】Yang B B, Wang X Y, Xu W J, et al. Experiments on laser bending of stainless steel-carbon steel laminated sheet[J]. Laser & Optoelectronics Progress, 2012, 49(9): 091403.
杨冰冰, 王续跃, 徐文骥, 等. 不锈钢-碳钢层合板激光弯曲试验研究[J]. 激光与光电子学进展, 2012, 49(9): 091403.

【25】Ma X P, Wang X Y, Xu W J, et al. Heat conduction characteristics of stainless steel-carbon steel laminated sheet bending position[J]. Laser & Optoelectronics Progress, 2013, 50(10): 101401.
马绪鹏, 王续跃, 徐文骥, 等. 不锈钢-碳钢层合板激光弯折区的热传导特性[J]. 激光与光电子学进展, 2013, 50(10): 101401.

引用该论文

Zhang Guodong,Wang Xiao,Tan Wensheng,Sun Yuedong,Jiang Yingjie,Liu Huixia. Process Modeling and Optimization of Laser Bending Forming of Copper-Nickel Multilayer Composite Sheets[J]. Laser & Optoelectronics Progress, 2018, 55(6): 061404

张国栋,王霄,谭文胜,孙跃东,姜英杰,刘会霞. 铜-镍多层复合薄板激光弯曲成形工艺建模与优化[J]. 激光与光电子学进展, 2018, 55(6): 061404

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF