强激光与粒子束, 2018, 30 (8): 083005, 网络出版: 2018-08-21  

一种直角转弯圆波导模式转换器设计

Design of mode converter using orthogonal circular waveguide
作者单位
西南交通大学 物理科学与技术学院, 成都 610031
摘要
设计了一种尺寸紧凑并具有高功率容量的圆波导TE11-TM01模式转换器,结构呈直角转弯形状。该转换器利用传输TE11模式的圆波导与其E面分支耦合进行模式转换,并在TM01输出端口的反向传输短路面加入调配螺钉来拓宽频带。设计结果表明,转换器在工作频率12.7 GHz处的转换效率为99.6%,大于90%的带宽约20%,填充SF6绝缘气体工作时可获得12 MW的功率容量。
Abstract
This paper presents a compact, high-power mode converter using, which consists of two orthogonal circular waveguides. The mode conversion is based on the coupling relationship of TE11 mode and the TM01 mode transmitting at E-plane branch of the circular waveguide. In addition, wider bandwidth is achieved by placing a tuning screw at the short end. The results show that the conversion efficiency at 12.7 GHz is 99.6% and the bandwidth greater than 90% is ranging from 11 GHz to 14 GHz.

梁源, 刘庆想, 张健穹, 李相强. 一种直角转弯圆波导模式转换器设计[J]. 强激光与粒子束, 2018, 30(8): 083005. Liang Yuan, Liu Qingxiang, Zhang Jianqiong, Li Xiangqiang. Design of mode converter using orthogonal circular waveguide[J]. High Power Laser and Particle Beams, 2018, 30(8): 083005.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!