强激光与粒子束, 2018, 30 (10): 101002, 网络出版: 2018-11-25   

DF化学激光器扩压器流场仿真及优化

Simulation and optimization of DF chemical lasers’ diffuser
作者单位
中国船舶重工集团公司 第七一八研究所, 河北 邯郸 056027
摘要
建立了DF化学激光器压力恢复系统扩压器的流场仿真模型, 对扩压器流场结构进行了仿真分析。结果显示, 扩压器超扩段长度为1310 mm时, 激光器可工作压力为7.18 kPa。增加超扩段长度至1810 mm, 激光器的可工作压力上升至8.25 kPa; 插入2片楔形叶片, 激光器的可工作压力提升至8.52 kPa。适当增加超扩段长度和插入叶片的方式可在一定范围内提高激光器的工作压力, 研究结果对于化学激光器扩压器的设计与优化具有重要的参考价值。
Abstract
The model of diffuser used on chemical laser’s pressure recovery system is built, the fluid field is simulated. The results show that when the supersonic part of the diffuser is 1310 mm long, the background pressure that the chemical laser can lase normally is 7.18 kPa. When the supersonoic length is 1810 mm, the diffuser’s recovery pressure rises to 8.25 kPa; when there are 2 vanes in the supersonic flow channel, the diffuser’s recovery pressure rises to 8.52 kPa. The lengthening of the diffuser can raise the pressure, but the losing of the total energy will induce the difficulty of the diffuser’s start-up. The use of vanes can raise the diffuser’s recovery pressure successfully, and the scale of the recovery system could be reduced at the same time.

李金雪, 王杰, 颜飞雪, 王植杰, 郭建增. DF化学激光器扩压器流场仿真及优化[J]. 强激光与粒子束, 2018, 30(10): 101002. Li Jinxue, Wang Jie, Yan Feixue, Wang Zhijie, Guo Jianzeng. Simulation and optimization of DF chemical lasers’ diffuser[J]. High Power Laser and Particle Beams, 2018, 30(10): 101002.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!