激光技术, 2018, 42 (6): 751, 网络出版: 2018-12-25   

六自由度姿态变换视觉实验平台及应用

Six-DOF attitude transform visual experiment platform and its application
作者单位
1 华北理工大学 电气工程学院, 唐山 063210
2 卡尔加里大学 机械及制造工程系, 卡尔加里 T2N 1N4
3 唐山劳动技师学院 电气工程系, 唐山 063300
摘要
为了适应生产线上不同摆放姿态下工件的视觉识别, 实现基于视觉的机器人工件定位及抓取, 构建了六自由度工件姿态变换模拟实验平台运动学模型及视觉系统模型, 通过坐标变换实现工件姿态参量的测量。建立了六自由度姿态变换实验平台坐标系, 通过3个滑动副、3个转动副, 构建了基于Denavit-Hartenberg(D-H)方法的六自由度姿态变换实验平台运动学模型, 并得到了D-H参量表、各个关节的变换矩阵及实验平台基座到末端的总变换矩阵。基于小孔成像原理, 构建了姿态变换实验平台视觉系统的内、外参量模型, 获得了工件表面点与图像点间的内参量关系矩阵及工件坐标系与相机坐标间的外关系矩阵。由激光环形光条图像, 得到工件表面在摄像机坐标系中的法向量, 并通过坐标系间的变换得到工件表面在世界坐标系中的法向量, 进而推算出工件的姿态参量。结果表明, 姿态参量的横滚角θ平均误差为0.373°, 俯仰角φ平均误差为0.253°, 偏转角ξ平均误差为0.673°。被测工件的姿态测量值与真实值基本吻合, 满足不同姿态下的工件视觉测量要求。
Abstract
In order to adapt the visual recognition of workpiece with different postures in production line and realize the localization and grasping of workpiece based on vision robot, the kinematics model and the visual system model of six degree of freedom(6-DOF) workpiece attitude transformation simulation experiment platform were constructed. The measurement of attitude parameters of workpiece was realized by coordinate transformation. 6-DOF attitude transformation experimental platform coordinate system was set up. Kinematics model of six degree of freedom attitude transformation experiment platform based on Denavit-Hartenberg (D-H) method was constructed through 3 sliding pairs and 3 rotational pairs. D-H parameter table, transformation matrix of each joint and total transformation matrix of experimental platform from the base to the end were obtained. Based on the principle of small hole imaging, the internal and external parameter model of attitude transformation experimental platform was constructed. The internal parameter relation matrix between workpiece surface point and image point and the external relation matrix between workpiece coordinate system and camera coordinate system were obtained. The normal vector of workpiece surface in camera coordinate system was obtained from the image of laser ring light strip. And then, the normal vector of workpiece surface in the world coordinate system was obtained through the transformation of coordinate system. Finally, attitude parameters of workpiece were calculated. The results show that average error of roll angle is 0.373°, average error of pitch angle is 0.253° and average error of deflection angle is 0.673°. The measured value of workpiece is basically consistent with the true value, which meets the requirements of workpiece vision measurement under different postures.

王福斌, 刘洋, 程月, 刘海涛, 徐傲. 六自由度姿态变换视觉实验平台及应用[J]. 激光技术, 2018, 42(6): 751. WANG Fubin, LIU Yang, CHENG Yue, LIU Haitao, XU Ao. Six-DOF attitude transform visual experiment platform and its application[J]. Laser Technology, 2018, 42(6): 751.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!