太赫兹科学与电子信息学报, 2018, 16 (5): 871, 网络出版: 2019-06-10   

2~4 GHz宽带高效率功放的设计

Design of a broadband high-efficiency power amplifier working in 2-4 GHz
作者单位
电子科技大学 电子工程学院,四川 成都 611731
摘要
针对宽带高效率功放的设计要求,基于宽带匹配网络设计了一款GaN宽带高效率功率放大器,其工作频率覆盖整个S波段。仿真结果显示,该功放在整个S频段内漏极效率(DE)大于62%,功率附加效率(PAE)大于57%,增益大于10.6 dB。实测结果表明,该功放在整个频段内DE大于54%,PAE大于48%,增益大于9 dB,增益平坦度在1 dB以内,实现了S波段高效率宽带功率放大器的设计。
Abstract
A GaN broadband high efficiency power amplifier is designed based on the broadband matching network for the requirements of the broadband high efficiency power amplifier, covering the entire S band. Simulation results show that the Drain Efficiency(DE) is better than 62%, the Power Added Efficiency(PAE) is better than 57% and the gain is more than 10.6 dB. And the test results show that the DE is better than 54%, the PAE is better than 48% and the gain is more than 9 dB, the flatness of the gain is less than 1 dB, achieving the design of the broadband high-efficiency power amplifier.

孙洪铮, 丁浩, 王志刚. 2~4 GHz宽带高效率功放的设计[J]. 太赫兹科学与电子信息学报, 2018, 16(5): 871. SUN Hongzheng, DING Hao, WANG Zhigang. Design of a broadband high-efficiency power amplifier working in 2-4 GHz[J]. Journal of terahertz science and electronic information technology, 2018, 16(5): 871.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!