应用光学, 2019, 40 (5): 779, 网络出版: 2019-11-05   

光学元件缺陷在线检测光学系统设计

Optical system design for on-line defects detection of optical components
张文学 1,2,3,*王继红 1,2,3任戈 1,2,3
作者单位
1 中国科学院 光束控制重点实验室, 四川 成都 610209
2 中国科学院 光电技术研究所, 四川 成都 610209
3 中国科学院大学, 北京 100049
摘要
为实现对望远镜系统中光学元件表面缺陷在线检测, 介绍了一种用于光学元件表面缺陷检测的变焦距成像光学系统, 采用机械变焦形式实现变焦功能。根据望远镜系统技术要求计算出变焦距系统的关键参数, 通过Zemax软件设计并优化得到最终结果, 整个变焦系统的设计实现了90 mm~540 mm的6倍变焦, 在变焦过程中F数和像面位置保持不变, 变焦系统总长为553.1 mm。从调制传递函数(MTF)、点列图2个方面分析了系统的成像质量, 系统在各焦距处的MTF值在100 lp/mm处均大于0.3, 物方分辨率优于0.055 mm, 在不同焦距处弥散斑半径均方根值均控制在艾里斑半径范围内。最后对系统环境适应性进行了分析, 讨论了工作温度范围为-10℃~40℃时对系统成像质量的影响, 并给出了温度补偿方案。实验结果表明, 补偿后的系统成像质量良好, 满足实际需求。
Abstract
In order to realize the on-line detection of the surface defects of optical elements in the telescope system, a zoom imaging optical system for the detection of the surface defects of optical elements was introduced. Firstly, some key parameters of the zoom system were calculated according to the technical requirements of the telescope system. Then, the final result was obtained after design and optimization with Zemax software. Thewhole zoom system achieves a 6-fold continuous zoom with a focal length of 90 mm~540 mm. During the zoom process, the F number and image surface position of the system remain unchanged, and the design results show that the total length of the zoom system is 553.1mm.Finally, we analyzed the imaging quality of the system from modulation transfer function (MTF) and point sequence diagram.The MTF value of the system at each focal length is greater than 0.3 in 100 lp/mm, and the object resolution is better than 0.055 mm. The root mean square value of the diffusion spot radius of the system at different focal lengths is controlled within the airy spot radius. In addition, we also analyzed the environmental adaptability of the system, studiedthe imaging quality of the system in the temperature range of -10℃~40℃, and gave the temperature compensation scheme. The imaging quality of the whole system is good and can meet the actual demandafter compensation.

张文学, 王继红, 任戈. 光学元件缺陷在线检测光学系统设计[J]. 应用光学, 2019, 40(5): 779. ZHANG Wenxue, WANG Jihong, REN Ge. Optical system design for on-line defects detection of optical components[J]. Journal of Applied Optics, 2019, 40(5): 779.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!