光电工程, 2019, 46 (10): 180445, 网络出版: 2019-11-19  

基于光电伺服平台的动态角度测量方法研究

Research on dynamic angle measurement method based on electro-optical servo platform
作者单位
1 石家庄铁道大学电气与电子工程学院,河北 石家庄 050043
2 中国人民解放军32181 部队,河北 石家庄 050000
3 陆军工程大学石家庄校区电子与光学工程系,河北 石家庄 050003
摘要
针对动态角度测量的成本高及精度低的问题,提出一种基于非合作目标视觉跟踪的光电测量方法。利用安装在被测对象上的光电伺服平台搭载相机和激光测距仪对非合作目标进行实时跟踪和距离测量,根据伺服平台输出的精密角度、非合作目标距离和被测角度之间的转化关系计算出被测动态角度值。研制了基于光电伺服平台的动态角度测量装置,并对其进行了精度标定和误差分析。利用高精度旋转台模拟被测动态角度进行实验,验证了测量方法的可行性。实验结果表明在测量空间11.082 m 范围内,测角误差在±0.09°以内。
Abstract
Aiming at the measurement problem of high cost and low precision in dynamic angle, an electro-optical measurement method based on non-cooperative target vision tracking is presented. By using electro-optical servo platform mounted on the measured object to carry the camera and the laser rangefinder for the real time tracking and distance measurement of the non-cooperative target, the dynamic angle value is calculated according to the conversion relationship between the high precision angle of measurement of the servo system and the distance of the non-cooperative target. A dynamic angle measuring device is developed, and its precision calibration and error analysis are carried out. Using the high precision manual displacement table to simulate the measured dynamic angle to experiment, the feasibility of the measuring method is verified. The experimental results show that the measured angle error is 0.09° within the range of 11.082 m.

佀明华, 王伟明, 张勇, 吴浩. 基于光电伺服平台的动态角度测量方法研究[J]. 光电工程, 2019, 46(10): 180445. Si Minghua, Wang Weiming, Zhang Yong, Wu Hao. Research on dynamic angle measurement method based on electro-optical servo platform[J]. Opto-Electronic Engineering, 2019, 46(10): 180445.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!