应用光学, 2019, 40 (6): 1097, 网络出版: 2020-02-11   

基于线阵CCD像素数提取的高速运动目标形变测量方法研究

Research on deformation measurement method of high-speed moving target based on linear CCD pixel number extraction
作者单位
北京理工大学 光电学院 精密光电测试仪器及技术北京市重点实验室, 北京 100000
摘要
针对传统光学成像测量方法对高速运动目标成像帧频低、像质模糊, 难以满足对目标形变高精度测量的缺点, 提出一种基于线阵CCD像素数提取的高速运动目标形变测量方法。该方法利用线阵CCD高分辨率、高帧频等优势, 通过提取线阵CCD输出目标强度——像素曲线斜率变化率最大点来获取目标所占像素数N的像素数提取方法, 同时采用DMD模拟高速运动目标形变过程, 配合基于线阵CCD像素数提取的高速运动目标形变测量方法进行形变测量实验验证。实验结果显示采用该方法对V=450 km/h的高速运动目标进行形变量测量时, 可以满足目标形变测量偏差小于0.3 mm, 标准差小于0.5 mm, 相对误差最低0.01%。实现了高速运动目标形变量的准确测量, 为高速磨损测试、高温形变测试、高压形态测试等奠定了基础。
Abstract
Aiming at the shortcomings of traditional optical imaging measurement methods, such as low frame frequency, blurred image quality and difficulty in meeting the requirements of high-precision measurement of target deformation, a new method of high-speed target deformation measurement based on linear CCD pixel number extraction was proposed.This method takes advantages of the linear charge-coupled device (CCD), such as high resolution and high frame frequency. The pixel extraction method for obtaining the target number N of pixels was used by extracting the line array CCD output target intensity-the maximum point of the slope change rate of the pixel curve. At the same time ,the digital micromirror device(DMD) was utilized to simulate the high-speed moving target deformation process , combined with the linear CCD pixel number extraction based high-speed moving target deformation measurement method to conduct experimental verification. The experimental results show that the deformation of the high-speed moving target with V=450 km/h can be measured by the method proposed, which can meet the requirements for the target deformation measurement deviation less than 0.3 mm, the standard deviation less than 0.5 mm, and the lowest relative error of 0.01%. The accurate measurement of the high-speed moving target shape variable is realized, which lays a foundation for high-speed wear test, high-temperature deformation test and high-pressure shape test.

徐成强, 王营博, 曹杰, 郝群, 袁诗翥, 姜雅慧. 基于线阵CCD像素数提取的高速运动目标形变测量方法研究[J]. 应用光学, 2019, 40(6): 1097. XU Chengqiang, WANG Yingbo, CAO Jie, HAO Qun, YUAN Shizhu, JIANG Yahui. Research on deformation measurement method of high-speed moving target based on linear CCD pixel number extraction[J]. Journal of Applied Optics, 2019, 40(6): 1097.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!