应用激光, 2019, 39 (6): 966, 网络出版: 2020-03-10   

黄铜与不锈钢异种金属激光焊接工艺研究

Research on Laser Welding Process of Dissimilar Metal with Brass-stainless Steel
作者单位
1 包头机械工业职业学校 内蒙古包头014060
2 包头职业技术学院 内蒙古包头014030
摘要
黄铜与不锈钢材料在物理性能以及化学成分上有较大差异, 这种异种金属的焊接存在较大难题。文中采用脉冲宽度为纳秒级的光纤激光器对黄铜与不锈钢进行搭接焊接实验。通过激光平均功率、脉冲宽度、焊接速度进行三因素三水平正交实验, 得到最大的焊接接头拉力89 N。对焊缝进行切片分析, 结果表明焊缝内部无气孔, 上层黄铜材料进入下层不锈钢材料内部, 黄铜与不锈钢材料形成了较好的混合接头, 有利于提高焊缝接头强度。
Abstract
Brass and stainless steel materials had greatly differences in physical properties and chemical composition, which was difficult to weld dissimilar metals.The fiber laser with pulse duration of nanosecond was used for the welding experiment of brass and stainless steel. Through three factors three levels orthogonal experiment of laser power、pulse duration、welding speed, the largest welding joint force was 89N.The analysis of cross section showed that no pore existed in the welds, and top material of brass immersed into lower material of stainless steel, formed a good mixed joint, which was in favour for the strength of weld joint.

刘文东, 李红. 黄铜与不锈钢异种金属激光焊接工艺研究[J]. 应用激光, 2019, 39(6): 966. Liu Wendong, Li Hong. Research on Laser Welding Process of Dissimilar Metal with Brass-stainless Steel[J]. APPLIED LASER, 2019, 39(6): 966.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!