红外, 2020, 41 (1): 15, 网络出版: 2021-01-27   

晶圆级封装非制冷大面阵红外探测器应用分析

Format Uncooled Infrared Detector
作者单位
烟台艾睿光电科技有限公司,山东烟台264006
摘要
红外成像系统已经应用到**和民用领域多年,但一直没得到广泛应用,主要原因是其分辨率低、成本高、工艺不稳定和技术门槛高等。解决这些问题需要从传感器工艺、探测器封装、红外图像处理芯片等方面加以改进。红外技术未来会朝低成本、专用处理芯片、高分辨率等方向发展。目前,国内厂商陆续推出了晶圆级封装(Wafer-Level Package,WLP)、高分辨率探测器和专用图像处理芯片等方面的新产品。但采用这些新器件的红外成像系统却没有得到相应的研究。本文主要基于烟台艾睿光电科技有限公司新推出的晶圆级封装的1280×1024元红外探测器以及专用图像处理芯片的实际应用,在系统架构、结构散热、成像算法等方面对由新器件构建的红外成像系统进行了验证分析。
Abstract
Infrared imaging systems have been used in the military and civilian fields for many years, but have not been widely used, mainly due to their low resolution, high cost, unstable process and high technical threshold. Solving these problems requires improvements in sensor technology, detector packaging and infrared image processing chips. Infrared technology will develop in the future in the direction of low cost, dedicated processing chips and high resolution. At present, domestic manufacturers have successively launched new products such as wafer-level packaging, high-resolution detectors and dedicated image processing chips. However, there is no corresponding research on the infrared imaging system of these new devices. This article is mainly based on the practical application of Yantai IRay Technology Co., Ltd.′s new wafer-level packaged 1280×1024 infrared detector and the special image processing chip. The infrared imaging system is verified and analyzed in terms of system architecture, structural cooling and imaging algorithms.

陶俊伟, 王宏臣, 董珊, 王丽丽. 晶圆级封装非制冷大面阵红外探测器应用分析[J]. 红外, 2020, 41(1): 15. TAO Jun-wei, WANG Hong-chen, DONG Shan, WANG Li-li. Format Uncooled Infrared Detector[J]. INFRARED, 2020, 41(1): 15.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!