中国激光, 2021, 48 (5): 0501002, 网络出版: 2021-03-03   

高功率低噪声全固态连续波单频激光器研究进展 下载: 1991次特邀研究论文

Progress on High-Power Low-Noise Continuous-Wave Single-Frequency All-Solid-State Lasers
作者单位
1 山西大学光电研究所量子光学与光量子器件国家重点实验室, 山西 太原 030006
2 山西大学极端光学协同创新中心, 山西 太原 030006
摘要
高功率低噪声全固态连续波单频激光器在量子科学与技术、冷原子物理、高精度精密测量以及光学传感等领域有着广泛的应用。为了满足应用需求,在泵浦功率增大的条件下,需克服激光晶体热效应的影响,提高激光器输出功率,同时保持单频输出特性和光束质量不变,降低激光器在低频段的强度噪声并扩展激光器的输出波长等。针对这些关键问题,本课题组开展了原理研究和器件设计,研制出一系列具有不同输出波长的高功率低噪声全固态连续波无跳模单频激光器。总结和介绍了本课题组在高功率低噪声全固态连续波无跳模单频激光器方面的研究进展,并展望了单频激光器的发展趋势。
Abstract

Significance High-power low-noise continuous-wave (cw) single-frequency all-solid-state lasers (ASSL) have various advantages, including high conversion efficiency, high beam quality, low noise, and long coherence length, and have been widely used in many application fields, e.g. quantum science and technology, cold atom physics, high-precision measurement, high-efficiency frequency conversion, coherent communication, lidar, and optical sensing. This type of laser promotes the development of essential quantum physics research and the practicality of quantum technology. For example, such lasers can be used to prepare a high entanglement, multi-component quantum entanglement source, which is an important technical element in quantum secure communications and quantum computing. In addition, such lasers are basic light sources for high-precision measurement based on laser interferometers. With the observation that gravitational waves from a binary black hole merge, high-precision measurement has attracted significant attention recently. The sensitivity of the gravitational wave device is inversely proportional to the root mean square of the injected laser power, and thus if the injection laser power of the advanced LIGO device is expected to reach 125 W, its detection sensitivity will be 10 times higher than that of the LIGO device.

Progress To satisfy the application requirements of ASSLs in quantum science and technology, cold atom physics, and high-precision measurement, high-power low-noise cw single-frequency mode-hop-free ASSLs with different central wavelengths were investigated and fabricated. First, based on the analysis of the thermal effect of laser crystal in laser-diode end-pumped high-power ASSLs and the improvement measures for the thermal effect of laser crystals, a universal model of sufficient conditions for a stable single-longitudinal-mode operation for high-power cw ASSLs was established by introducing the nonlinear losses of the fundamental wave when a nonlinear crystal was inserted into the cavity, and a high-power cw single-frequency mode-hop-free ASSL was fabricated. Second, the output power of the cw single-frequency ASSL was scaled up under intense pump. A 125W cw single-frequency 1.064μm laser was achieved by a homemade 50.3W cw single-frequency laser, and a two-stage dual end-pumped master-oscillator power amplifier acted as the seed source and amplifier. The measured power stability of the 1.064μm laser over 8h was better than ±0.73%. In addition, a 25.3W cw single-frequency 532nm laser was obtained with an optical-optical conversion efficiency of 32.2%, and the power stability was greater than 0.4% over 8h. Third, the noise characteristics of the cw single-frequency ASSLs were studied and suppressed. The intensity and phase noise of the cw single-frequency ASSLs reached the shot noise level (SNL) for analysis frequencies greater than 5MHz. The intensity noises of the ASSLs were much greater than the SNL in the low analysis frequency range and less than several megahertz. The intensity noises could be manipulated by intra-cavity nonlinear loss, and the resonant relaxation oscillation noise peak of a 1.064μm laser was reduced and shifted toward low frequencies when the nonlinear loss was increased. The intensity noises of the ASSLs were suppressed by controlling the stimulated emission rate in the laser cavity and by a control system based on a Mach-Zehnder interferometer outside the laser cavity. Fourth, the central wavelengths of cw single-frequency ASSLs were extended. 1) A high-power stable low-noise cw single-frequency 540nm and 1.08μm dual-wavelength Nd∶YAP/LBO laser was fabricated. Maximum output powers of 4.5W at 540nm and 1.5W at 1.08μm were achieved simultaneously. 2) Stable low-noise cw single-frequency 473nm and 946nm Nd∶YAG/PPKTP lasers were fabricated. Maximum output powers of 1.01W at 473nm and 1.5W at 946nm were achieved, respectively. 3) A high-power stable low-noise cw single-frequency 671nm and 1.34μm dual-wavelength Nd∶YVO4/LBO laser was fabricated. Maximum output powers of 3.17W at 671nm and 2.15W at 1.34μm were achieved simultaneously. 4) A stable low-noise cw single-frequency 1.55μm Er,Yb∶YAB laser was fabricated. Maximum output power of 400mW at 1.55μm was achieved. 5) An all-solid-state cw single-frequency Ti:sapphire laser with continuous frequency-tuning was achieved via an intra-cavity locked LiNbO3 electro-optic etalon. A maximal tuning range of 110nm (760--870nm) was obtained by rotating the BRFs, and a continuous frequency-tuning range of 20GHz was realized after the electro-optic etalon was locked to the oscillating mode of the Ti:sapphire laser. Maximal output power of 2.88W at 795nm was obtained under a pump power of 16.53W. 6) A continuously tunable single-frequency 461nm Ti:sapphire laser was obtained by PPKTP intra-cavity doubling. Output power at 460.86nm was 1.05W under a pump power of 12W, and the continuous frequency-tuning range of the 461nm blue laser was 15.756GHz. 7) A continuously tunable single-frequency 455nm blue laser was implemented by an intra-cavity frequency doubled Ti:sapphire laser with an LBO crystal. The output power at 455nm was 1.0W under a pump power of 13.5W, and the continuous frequency-tuning range of the 455nm blue laser was up to 32GHz.

Conclusion and Prospect Based on the theoretical study and experimental design of lasers, a series of high-power, low-noise cw single-frequency mode-hop-free ASSLs with different central wavelengths were fabricated. Relative to the future development of high-power, low-noise cw single-frequency ASSLs, scaling up the output power and output energy of the ASSLs remains an important topic. In addition, the central wavelengths and linewidths of these lasers should be extended and narrowed, respectively, and the beam quality and directional stability of the laser beams should be improved further. Finally, to improve the sensitivity of high-precision optical measurements, the extra intensity noise of cw single-frequency ASSLs should be suppressed further, and it is the best that intensity noise can reach the SNL in the whole analysis frequency range.

张宽收, 卢华东, 李渊骥, 冯晋霞. 高功率低噪声全固态连续波单频激光器研究进展[J]. 中国激光, 2021, 48(5): 0501002. Kuanshou Zhang, Huadong Lu, Yuanji Li, Jinxia Feng. Progress on High-Power Low-Noise Continuous-Wave Single-Frequency All-Solid-State Lasers[J]. Chinese Journal of Lasers, 2021, 48(5): 0501002.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!