红外与激光工程, 2020, 49 (4): 0413002, 网络出版: 2020-05-27   

激光测距仪与相机信息融合过程中位姿标定方法 下载: 535次

Calibration method of laser range finder and camera in information fusion process
作者单位
1 航天东方红卫星有限公司,北京 100094
2 北京航天测控技术有限公司,北京 100041
摘要
激光测距仪与视觉图像的融合研究在最近的工业机器人等应用领域中受到越来越多的关注,其中对这两种仪器的位姿标定有利于对二者信息的有效融合。以单点激光测距仪和相机的位姿融合为主要研究内容,提出两种确定两者相对位置和方向的标定方法,在建立光斑相机坐标的基础上分别以可见光斑和不可见光斑为研究内容,分别通过光斑的坐标和平面约束对两种情况建立标定方程,并结合实验验证两种标定方法的有效性和可靠性,实验结果表明:在有限次测量次数的情况下标定结果能够使重投影误差达到3个像素以内,而且运算时间大大减小。
Abstract
The fusion of laser range finder (LRF) and visual image has received more and more attention in recent applications such as industrial robots. The calibration of the poses of these two instruments was conducive to the effective fusion of the two information. The single-point laser range finder and the camera's pose fusion were the main research contents. Two calibration methods for determining the relative position and direction of the two were proposed. Based on the coordinates of the spot camera, the spot was visible and the spot was invisible as the research content. The research content establishes the calibration equations for the two cases by the coordinates of the spot and the plane constraint respectively, and the validity and reliability of the two calibration methods were verified by experiments. The experimental results show that the calibration results can be made in the case of a limited number of measurements. The re-projection error is within 3 pixels, and the computation time is greatly reduced.

王鹤, 李泽明. 激光测距仪与相机信息融合过程中位姿标定方法[J]. 红外与激光工程, 2020, 49(4): 0413002. He Wang, Zeming Li. Calibration method of laser range finder and camera in information fusion process[J]. Infrared and Laser Engineering, 2020, 49(4): 0413002.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!