强激光与粒子束, 2020, 32 (2): 025004, 网络出版: 2020-03-18
“聚龙一号”4层绝缘堆和真空区电路模拟方法
Simulation method of quadruple-level circuit model for stack and vacuum section of Julong-I facility
“聚龙一号” 绝缘堆 磁绝缘传输线 电路模拟 Z箍缩 Julong-I insulation stack magnetic insulation transmission line FCM-PTS FCM-PTS circuit simulation Z-pinch
摘要
建立了“聚龙一号”驱动器4层绝缘堆和真空区电路模型。在4层绝缘堆入口处,采用预测?校正的计算方法处理4层绝缘堆的输入电流分配问题,避免了复杂的二维电路模拟,既保证了精度,又大大提高了计算效率。将此新模型加入FCM-PTS程序中,与零维负载内爆动力学程序耦合,得到了各层外磁绝缘传输线的电流波形模拟结果,并改善了负载电流峰值的模拟结果与实验结果的一致性。
Abstract
The quadruple-level circuit model for stack and vacuum section of Julong-I facility was established. To avoid complicated two-dimensional circuit simulation, the prediction-correction method was used to deal with the distribution of currents at the entrance of the quadruple-level insulation stack. The accuracy and efficiency were both ensured by this method. By applying this model to the FCM-PTS code coupled with the snow-plow model for the Z-pinch load, the current for each level of the outer magnetic insulation transmission line was obtained, while the coincidence of load currents between simulation and experiment was also improved.
毛重阳, 薛创, 肖德龙, 丁宁. “聚龙一号”4层绝缘堆和真空区电路模拟方法[J]. 强激光与粒子束, 2020, 32(2): 025004. Chongyang Mao, Chuang Xue, Delong Xiao, Ning Ding. Simulation method of quadruple-level circuit model for stack and vacuum section of Julong-I facility[J]. High Power Laser and Particle Beams, 2020, 32(2): 025004.