激光与光电子学进展, 2016, 53 (7): 072202, 网络出版: 2016-07-08   

用于环形交叉路口照明的LED自由曲面透镜设计 下载: 581次

LED Freeform Lens Design for Roundabout Crossing Illumination
作者单位
深圳大学光电子器件与系统教育部/广东省重点实验室, 广东 深圳 518060
摘要
为了解决环形交叉路口的照明问题,基于非成像光学的光学扩展量守恒理论,提出了一种产生环形光斑透镜的方案。该方案对单个透镜和透镜阵列进行设计,并利用TracePro软件对其进行模拟,结果均能得到环形光斑。对于单个透镜,随着光源尺寸的增大,目标照明面的照度均匀性降低,光能利用率基本保持不变,当发光二极管(LED)光源尺寸为5 mm×5 mm时,目标照明面的照度均匀性为86.5%,光能利用率为90.3%。对于3种透镜阵列,通过设置合适的初始参数,得到目标照明面的照度均匀性在91%以上,光能利用率均在90%以上,符合道路照明设计标准。
Abstract
In order to solve the problem of the roundabout crossing illumination, a design method of lens with circular spots is proposed based on the theory of etendue conservation in non-imaging optics. Through the designed single lens and lens arrays, the circular spot can be obtained by simulation of TracePro software. The simulation of single lens shows that the illumination uniformity of the target surface is reduced with light source size increasing, but the efficiency keeps unchanged. The illumination uniformity of the target surface is about 86.5% and the efficiency is about 90.3% when the size of light emitting diode(LED) source is 5 mm×5 mm. For the three kinds of lens arrays, the illumination uniformities are more than 91% and efficiencies are more than 90% by setting the appropriate initial parameters. This design is in comformity with the design standards of road illumination.

曾丹, 彭冬生, 蒋月. 用于环形交叉路口照明的LED自由曲面透镜设计[J]. 激光与光电子学进展, 2016, 53(7): 072202. Zeng Dan, Peng Dongsheng, Jiang Yue. LED Freeform Lens Design for Roundabout Crossing Illumination[J]. Laser & Optoelectronics Progress, 2016, 53(7): 072202.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!