激光与光电子学进展, 2017, 54 (1): 011301, 网络出版: 2017-01-17   

光子晶体偏振分束器的设计与性能分析 下载: 688次

Design and Performance Analysis of Photonic Crystal Polarizing Beam Splitter
作者单位
1 南京邮电大学光电工程学院, 江苏 南京 210023
2 南京邮电大学贝尔英才学院, 江苏 南京 210023
摘要
设计了一种基于定向耦合结构的光子晶体偏振分束器。该分束器由两个单模波导构成, 通过调节两个单模波导的宽度可以改变耦合长度。利用时域有限差分法进行仿真分析, 结果表明, 在波长1550 nm下TE和TM两种偏振模可以分束, 透射率都达到90%以上, 消光比分别达到22.4 dB和18.2 dB。该光子晶体偏振分束器的尺寸为25.8 μm×13 μm。
Abstract
A photonic crystal polarizing beam splitter based on directional coupling structure is proposed. The beam splitter consists of two single-mode waveguides. By adjusting the width of the two single-mode waveguides, the coupling length can be changed. The splitter is simulated and analyzed by using finite-difference time-domain method. The results show that at the wavelength of 1550 nm, both TE and TM polarizations achieve mode split. The transmissivities of TE and TM modes both exceed 90% and the extinction ratios reach 22.4 dB and 18.2 dB respectively. The size of the device is only 25.8 μm×13 μm.

张信祥, 陈鹤鸣. 光子晶体偏振分束器的设计与性能分析[J]. 激光与光电子学进展, 2017, 54(1): 011301. Zhang Xinxiang, Chen Heming. Design and Performance Analysis of Photonic Crystal Polarizing Beam Splitter[J]. Laser & Optoelectronics Progress, 2017, 54(1): 011301.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!