激光与光电子学进展, 2017, 54 (6): 060003, 网络出版: 2017-06-08   

连续纤维增强金属基复合材料研究进展及其激光熔覆 下载: 712次

Research Progress on Continuous Fiber-Reinforced Metal Matrix Composites and Their Laser Cladding
作者单位
1 天津工业大学激光技术研究所, 天津 300387
2 天津工业大学纺织学院, 天津 300387
摘要
对连续纤维增强铝基、镁基和钛基复合材料的制备方法、微结构与性能进行了综述,指出了存在的问题,提出了激光熔覆纤维增强金属基复合材料的新方法,即将纤维预置包埋在合金粉末中,然后进行快速激光熔覆。该方法能精确控制过程参数,大幅减少制备时间,可获得性能优异的复合材料。
Abstract
The preparation methods, microstructures and properties of continuous fiber-reinforced aluminum, magnesium and titanium matrix composites are summarized. The existing problems are pointed out and a new method of preparing the fiber reinforced metal matrix composites by laser cladding is put forward. The fibers are embedded into the cladding powder first and then processed by laser cladding rapidly. This method can precisely control the processing parameters, reduce the processing time, and make the composites with a better performance be obtained.

石川, 雷剑波, 周圣丰, 郭津博, 王威. 连续纤维增强金属基复合材料研究进展及其激光熔覆[J]. 激光与光电子学进展, 2017, 54(6): 060003. Shi Chuan, Lei Jianbo, Zhou Shengfeng, Guo Jinbo, Wang Wei. Research Progress on Continuous Fiber-Reinforced Metal Matrix Composites and Their Laser Cladding[J]. Laser & Optoelectronics Progress, 2017, 54(6): 060003.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!