激光与光电子学进展, 2017, 54 (11): 111406, 网络出版: 2017-11-17  

激光喷丸对TC17钛合金疲劳强度的影响

Effect of Laser Peening on Fatigue Strength of TC17 Titanium Alloys
作者单位
1 北京航空航天大学物理科学与核能工程学院, 北京 100191
2 北京航空航天大学机械工程及自动化学院, 北京 100191
摘要
为了研究激光喷丸(LP)对TC17钛合金疲劳强度的影响,采用两次LP工艺对TC17钛合金进行了强化处理,并使用升降法测试比较了LP前后材料的疲劳强度。结果显示,LP可在TC17钛合金表面形成深度为11.7 μm的微凹坑,产生的残余压应力为LP前的2.46倍。残余压应力的增大引起了裂纹源位置的变化及疲劳条带的细化,TC17钛合金的疲劳强度提高了3.9%。
Abstract
In order to study the effect of laser peening (LP) on the fatigue strength of TC17 titanium alloys, the alloys are processed by LP for two times, and the fatigue strength of the materials before and after LP are tested and compared with the lifting and lowering method. The results show that the 11.7 μm deep micropits form on the surface of TC17 titanium alloys after LP and the produced residual compressive stress is 2.46 times that before LP. The increase of the residual compressive stress leads to the location change of crack sources and the refinement of fatigue strips, and the fatigue strength of TC17 titanium alloys is increased by 3.9%.

黄帅, 朱颖, 郭伟, 彭鹏, 刁训刚. 激光喷丸对TC17钛合金疲劳强度的影响[J]. 激光与光电子学进展, 2017, 54(11): 111406. Huang Shuai, Zhu Ying, Guo Wei2, Peng Peng2, Diao Xungang. Effect of Laser Peening on Fatigue Strength of TC17 Titanium Alloys[J]. Laser & Optoelectronics Progress, 2017, 54(11): 111406.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!