中国激光, 2017, 44 (5): 0502002, 网络出版: 2017-05-03   

不锈钢薄板非熔透激光搭接焊热源模型 下载: 520次

Heat Source Model for Non-Penetration Laser Lap Welding of Stainless Steel Sheets
作者单位
1 中车青岛四方机车车辆股份有限公司, 山东 青岛 266111
2 中国科学院金属研究所, 辽宁 沈阳 110016
摘要
基于不锈钢薄板非熔透CO2激光搭接焊和光纤激光搭接焊获得的实际焊缝形状,采用表面高斯+柱状体复合热源模型,得到热源比例系数分别为0.85和0.70。对其余4个热源描述参数,包括高斯热源半径和深度、柱状热源半径和深度进行正确设置,就可以获得不同焊接功率和焊接速度下,搭接焊缝形状表征参量(表面缝宽、中间熔宽和熔深)的变化规律。模拟结果与试验结果符合很好。
Abstract
Based on the actual weld shape from stainless steel sheets with non-penetration CO2 laser lap welding and fiber laser lap welding, by taking the Gaussian-plane+cylinder-body composite heat source model, the obtained heat source proportionality coefficients are 0.85 and 0.70, respectively. By correctly setting the other four parameters for describing heat source, including the radius and the depth of Gaussian heat source, and the radius and the depth of cylinder heat source, the change laws of weld shape characterization parameters (surface seam width, middle weld width and weld penetration) of lap welds can be obtained under different welding powers and welding speeds. The simulation results are well consistent with the experimental results.

韩晓辉, 陈静, 阚盈, 陈怀宁, 赵瑞荣. 不锈钢薄板非熔透激光搭接焊热源模型[J]. 中国激光, 2017, 44(5): 0502002. Han Xiaohui, Chen Jing, Kan Ying, Chen Huaining, Zhao Ruirong. Heat Source Model for Non-Penetration Laser Lap Welding of Stainless Steel Sheets[J]. Chinese Journal of Lasers, 2017, 44(5): 0502002.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!