中国激光, 2019, 46 (7): 0702003, 网络出版: 2019-07-11   

不同激光清洗方法对高强钢表面锈蚀层的去除研究 下载: 1947次

Elimination of Rusting Layer from High-Strength Steel Surface Using Different Laser Cleaning Methods
作者单位
哈尔滨工业大学先进焊接与连接国家重点实验室, 黑龙江 哈尔滨 150001
摘要
采用干式/液膜辅助式激光清洗方法对高强钢表面的锈蚀层进行处理,研究了激光功率对试样表面状态的影响规律,并对两种方法的除锈机理进行了对比分析。结果表明:两种清洗方法都能有效去除试样表面的锈蚀层,且低功率下液膜辅助式激光清洗效果比干式激光清洗效果更好。优化的液膜辅助式激光除锈工艺参数为:激光功率400 W,脉冲频率10 kHz,脉宽30 ns,此时试样表面氧元素的质量分数为3.38%,试样的表面粗糙度为3.04 μm。
Abstract
We investigate dry and liquid film-assisted laser cleaning methods and elucidate the influence of laser power on the state of a specimen surface. We also compare the derusting mechanisms of the two methods. The results denote that both the aforementioned methods can effectively eliminate the rusting layer on a sample surface,and the effect of liquid film-assisted laser cleaning at low power is better than that of the dry laser cleaning. The optimized liquid film-assisted laser cleaning process parameters include a laser power of 400 W, pulse frequency of 10 kHz, and pulse width of 30 ns. Under these conditions, the oxygen content of the sample surface is reduced to 3.38%,and the surface roughness is observed to be 3.04 μm.

雷正龙, 孙浩然, 陈彦宾, 田泽. 不同激光清洗方法对高强钢表面锈蚀层的去除研究[J]. 中国激光, 2019, 46(7): 0702003. Zhenglong Lei, Haoran Sun, Yanbin Chen, Ze Tian. Elimination of Rusting Layer from High-Strength Steel Surface Using Different Laser Cleaning Methods[J]. Chinese Journal of Lasers, 2019, 46(7): 0702003.

本文已被 16 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!