中国激光, 2020, 47 (9): 0902005, 网络出版: 2020-09-16   

长焦距绿光飞秒激光玻璃焊接 下载: 1353次

Long Focal Length Green Femtosecond Laser Welding of Glass
作者单位
北京工业大学激光工程研究院高功率及超快激光先进制造实验室, 北京 100124
摘要
超快激光玻璃焊接通常采用大数值孔径显微物镜对激光束进行聚焦,焊接严格限制在极小的焦体积内,且工作距离短,焊接速度低,焊缝宽度窄,不利于工业应用。采用75 W绿光飞秒激光器和255 mm长焦距扫描振镜实现了显示屏玻璃的非光学接触高速焊接,获得了焦点位置、脉冲能量和扫描速度对焊缝成形的影响规律以及焊接工艺窗口,无缺陷焊接速度可高达6 m/min。焊缝的剪切强度可高达20 MPa,并具有良好的耐水性和高透过率,说明本焊接方法具有广阔的应用前景。
Abstract
In ultrafast laser glass welding, the laser beam is usually focused by a large numerical aperture micro objective lens. The welding is strictly limited to a very small focal volume with short working distance, low welding speed, and narrow weld width, which limit its industrial applications. In this work, a 75 W green femtosecond laser equipped with a 255 mm-long focal scanning galvanometer was employed to achieve non-optical contact high-speed welding of display screen glasses. The effects of the focal position, pulse energy, and scanning speed on the weld formation were obtained, the welding process window was also obtained. An extremely high welding speed of 6 m/min was achieved without weld defects. In addition, the welds exhibited a shear strength of 20 MPa as well as good seal performance and transmittance, indicating that our method has a great prospect in industrial applications.

于淼, 黄婷, 肖荣诗. 长焦距绿光飞秒激光玻璃焊接[J]. 中国激光, 2020, 47(9): 0902005. Yu Miao, Huang Ting, Xiao Rongshi. Long Focal Length Green Femtosecond Laser Welding of Glass[J]. Chinese Journal of Lasers, 2020, 47(9): 0902005.

本文已被 8 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!