强激光与粒子束, 2013, 25 (11): 3073, 网络出版: 2013-11-14
串级二极管悬浮电极支撑控制系统的研制
Support and control system for suspension electrode of double-gap series diode
串接二极管 悬浮电极 支撑结构 同步控制 硬X射线源 series diode suspension electrode support structure synchronization control hard X-ray source
摘要
串级二极管悬浮电极支撑控制系统主要包括支撑结构、驱动电路和同步控制三部分。支撑结构采用基于电磁铁工作原理的支撑针,对悬浮电极进行三点定位;驱动控制采用高压脉冲电容放电驱动螺线电磁铁,使电磁铁支撑针在5 ms内移动30 mm,悬浮电极在撤去支撑的5 ms内自由落体125 μm;同步控制采用螺线电磁铁线圈信号作为同步控制初始信号,对该信号延时5 ms,触发“闪光二号”的前级触发源,启动“闪光二号”主机工作,实现螺线电磁铁与“闪光二号”主机的同步。使用该套支撑控制系统用于串级二极管前期研究,初步实现了两级间隙串联工作。
Abstract
The support and control system of double-gap series diode’s suspension electrode was developed. It consists of support pins, driver circuit and synchronization control part. The support pins are retracted using three small solenoids, and the suspension electrode is accurately located by the three support pins. The withdrawing support pins are driven by a capacitor discharge, and with the driving, the pins can move 30 mm and the suspension electrode can move 125 μm in 5 ms. The voltage signal of magnetic coil is used as the synchronization control signal. It triggers the time delay unit DG535, which may export a pulse delayed by 5 ms and trigger the forestage trigger source of “Flash-Ⅱ”. The “Flash-Ⅱ” starts at the same time when the support pins withdraw from the diode space. The experimental results indicate that the double-gap series diode is reliable with the suspension electrode’s support and control system.
杨莉, 来定国, 张玉英, 任书庆, 姚伟博, 杨实, 程亮, 张永民. 串级二极管悬浮电极支撑控制系统的研制[J]. 强激光与粒子束, 2013, 25(11): 3073. Yang Li, Lai Dingguo, Zhang Yuying, Ren Shuqing, Yao Weibo, Yang Shi, Cheng Liang, Zhang Yongmin. Support and control system for suspension electrode of double-gap series diode[J]. High Power Laser and Particle Beams, 2013, 25(11): 3073.